Tikkurila worldwide
PRODUCT DATA SHEET
07.03.2012
(Previous date 02.09.2011)'

Supi Arctic - Sauna Finish

Supi_Arctic_1L[1]
DESCRIPTION Pearl shining, tintable acrylate finish for interior wooden surfaces in saunas.
PRODUCT FEATURES

Forms a dirt and water-repellent surface. Containts anti-mould agents, which protect the surface. Suitable for treatment of wood surfaces according to instructions.

RECOMMENDED USES Walls and ceilings in steam, washing and dressing rooms.Interior surface treatment of humid rooms. Not suitable for treatment of benches.

TECHNICAL DATA
  The paint is suitable for interior walls The paint is semi-matt The paint is water-borne Tool: brush
The coverage of the paint on rough surfaces
8
The coverage of the paint on smooth surfaces
12
Base paints EP
Colour Range Tikkurila's Arctic colour card.
Gloss grade Semi-matt
Building material emission class M1
Coverage 8-12 m2/l depending on wood species.
Can sizes 0,9 l, 2,7 l.
Thinner Water
Application method Brush
Drying time at 23°C and 50% relative air humidity Dust dry after 30 min. Next coat can be applied after 2-3 hours. Dry to use after 2 days.
Solids volume Approx. 17 %.
Density 1.0 kg/l, ISO 2811.
Storage Protect from frost.
Product code 8606404

APPLICATION DETAILS
Application conditions The surface to be painted must be dry, the temperature of the air at least + 5ºC, and the relative humidity of the air below 80 %.
Preparation New clean wood surfaces:
Remove dirt and dust. Moisten lightly with water spray, let dry and sand loose wood fiber off. Remove sanding dust.
Old dirty and previously with e.g. Supi Sauna Finish treated wood surfaces:
Wash down with Supi Saunapesu Cleaning Agent according to instructions, rinse thoroughly and let dry. Sand and dust off.
Waxing Stir Supi Arctic properly, from time to time also during usage.
Treat steam room walls once with tinted Supi Arctic. Thin with water if necessary. You can also treat the steam room walls twice, thinned with water up to 50 %. This way the brush marks will be less noticeable.
Treat washing and dressing room surfaces first with Supi Arctic thinned with 20 % of water, then with unthinned product.
Make a test application in a inconspicuous spot to ensure that the colour is correct. When the product is thinned the colour becomes
a little lighter and more transparent than in the colour card. The properties of the wood and previous treatments incluence the final colour. Treat entire small surfaces without interruptions and large panel surfaces 1-2 panels at a time in order to achieve a uniform colour. You get a matching colour to benches - without the pearl effect - by tinting Supi Sauna wax according to the Valtti Arctic colour card. Pre-heat and ventilate the sauna thoroughly before use.
Cleaning of tools Clean the tools with soap and water. Tikkurila Tool Cleaner is recommended for removal of hardened sauna finish.
Maintenance instructions Cleaning earliest about 1 month after applicaton, if necessary:

Clean the surface with Supi Saunapesu Cleaning Agent (1-2 dl of cleaning agent into 5 litres of water).

EU VOC 2004/42/EC-limit value (cat A/f) 130g/l(2010)

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Harmful to aquatic life with long lasting effects. Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1) and 2-octyl-2H-isothiazol-3-one. May produce an allergic reaction. Wear protective gloves. Avoid release to the environment. This paint contains a biocidal product for the preservation of the dry film. Contains: 2-octyl-2H-isothiazol-3-one and 3-iodo-2-propynyl butylcarbamate. A Safety Data Sheet is available on request. Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL Avoid spillage into drains, water systems and soil. Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste.
TRANSPORT VAK/ADR: not classified
akk211015 / sre030512 / 458 6404