Tikkurila worldwide

Interior doors


Lacquers for doors

Kiva Kalustelakka puolihimmea 2.7L[1]

Kiva Furniture Lacquer, gloss, semi-gloss, semi-matt and matt

For use on dry interior wood surfaces. Kiva Furniture Lacquer can also be used for protective lacquering of painted and stained surfaces. Not suitable for use on floors (use Parketti-Ässä Floor Lacquer for lacquering floors).

Coverage:

8-14 m2/litre per coat. Actual spreading rate will depend upon texture, porosity and hardness of the wood.

Paint calculator
Application method:

Brush, sponge or spray.  Polyester or nylon paint brushes are best suited for the application of Kiva Interior Lacquer.

Thinner: Water
Product data sheet Safety Data Sheet - Kiva Furniture Lacquer
Paneeli Assä Hirsisuoja - Log Protection

Paneeli-Ässä Hirsisuoja - Log Protection

For interior use on untreated wood, panels and log surfaces. Also suitable for concrete and brick. The product forms a dirt- and water-repellent film.

Coverage: 8 - 12 m2/l
Paint calculator
Application method: Brush or spray
Thinner: Water
Colour Cards: Interior Wood Stains and Lacquers
Product data sheet Safety Data Sheet - Panel Ace Log Treatment
paneeli assa titan

Paneeli-Ässä Titan (Panel Ace Titan )

Panelled walls and ceilings, logs, doors, etc. with light-coloured wooden surfaces. Dry lacquer surfaces are slightly whitish. Panel-Ace Titan is not suitable for treatment of dark wood surfaces.

Coverage: 8 - 12 m2/l for sawn surfaces Paint calculator
Application method: Brush and spray
Thinner: Water
Product data sheet Safety Data Sheet - Panel Ace Titan
Unica Super Gloss Lacquer

Unica Super - Urethane Alkyd Lacquer, gloss

Unica Super is suitable for application on interior and exterior wooden surfaces. Tinted product gives better protection against sunlight than untinted product.

Coverage: 12 - 14 m2/l per coat.
The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.

Paint calculator
Application method: Brush or spray. For airless spray use a nozzle 0.009" - 0.013" (0.230 - 0.330 mm).
Thinning: if necessary thin up to 10 vol-% with white spirit 1050.

Thinner: White Spirit 1050
Product data sheet Safety Data Sheet - UNICA SUPER Lacquer gloss and semi-gloss
Unica Super Semigloss Lacquer

Unica Super - Urethane Alkyd Lacquer, semi-gloss

Unica Super is suitable for application on interior and exterior wooden surfaces.

Coverage: 12 - 14 m2/l per coat.
The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method. Paint calculator
Application method: Brush or spray. For airless spray, use a nozzle 0.009" - 0.013" (0.230 - 0.330 mm).
Thinning: If necessary thin up to 10 vol-% with white spirit 1050.

Thinner: White Spirit 1050
Product data sheet Safety Data Sheet - UNICA SUPER Lacquer gloss and semi-gloss
Unica Super Semimatt Lacquer

Unica Super - Urethane Alkyd Lacquer, semi-matt

Boats, furniture and floors that are subject to light mechanical stress.

Coverage: 8-10 m2/l per coat.
The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.

Paint calculator
Application method: Brush or spray. For airless spray application, use a nozzle 0.009" - 0.013" (0.230 - 0.330 mm).
Thinning: 0-5% with white spirit 1050. if necessary

Thinner: White Spirit 1050
Product data sheet Safety Data Sheet - UNICA SUPER Lacquer semi-matt

Paints for doors

Feelings furniture paint 2.7 l

Feelings Furniture Paint, semi-matt

Feelings Furniture Paint can be used on a wide range of interior surfaces, and dries to an attractive finish which is hard wearing and easily cleaned. Feelings Furniture Paint can also be used on primed metal and for repainting interior surfaces previously coated with waterborne, alkyd or acid catalysed paints.

Coverage: 8-10 m2/l per coat.  
The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.

Paint calculator
Application method:

Synthetic fiber brush, mohair roller.

Conventional spray:

-pressure 3-4 bar

-nozzle 1.4-1.8 mm

-thinning 20-40 vol-%

Airless spray:

-nozzle pressure 140-160 bar

-nozzle 0.009˝-0.013˝

-thinning 0-5 vol-%

Air assisted airless spray:

-nozzle pressure 80-120 bar

-atomization air pressure 1-2 bar

-nozzle 0.009˝-0.011˝

-thinning 0-5 vol-%           

spray tip.
Thinning: if necessary thin by up to 5% with water.

Thinner: Water
Colour Cards: Symphony 2436 and Feel the Colour
Product data sheet Safety Data Sheet - Feelings Furniture Paint
Helmi furniture paint gloss

Helmi Furniture Paint, Gloss

Suitable for new and previously painted wooden, chipboard, wood fibre board and metal surfaces. Also suitable for repainting of surfaces previously coated with an alkyd or acid catalysed paint. See instructions.


Not suitable for repainting of surfaces previously coated with nitrocellulose lacquers.

Coverage: 8-10 m2/l

Paint calculator
Application method:

Synthetic fiber brush, roller.

Conventional spray:

-pressure 3-4 bar

-nozzle 1.4-1.8 mm

-thinning 20-40 vol-%

Airless spray:

-nozzle pressure 140-160 bar

-nozzle 0.009˝-0.013˝

-thinning 0-5 vol-%

Air assisted airless spray:

-nozzle pressure 80-120 bar

-atomization air pressure 1-2 bar

-nozzle 0.009˝-0.011˝

-thinning 0-5 vol-%           

 

Thinner: Water
Colour Cards: Symphony 2436
Product data sheet Safety Data Sheet - Helmi Furniture Paint
Helmi himmea 0.9L

Helmi Furniture Paint, Matt - NOVELTY

Suitable for new and previously painted wooden, chipboard, wood fibre board and metal surfaces. Also suitable for repainting of surfaces previously coated with an alkyd or acid catalysed paint. See instructions.


Not suitable for repainting of surfaces previously coated with nitrocellulose lacquers.

Coverage: 8-10 m2/l

Paint calculator
Application method:

Synthetic fiber brush, roller.

Conventional spray:

-pressure 3-4 bar

-nozzle 1.4-1.8 mm

-thinning 20-40 vol-%

Airless spray:

-nozzle pressure 140-160 bar

-nozzle 0.009˝-0.013˝

-thinning 0-5 vol-%

Air assisted airless spray:

-nozzle pressure 80-120 bar

-atomization air pressure 1-2 bar

-nozzle 0.009˝-0.011˝

-thinning 0-5 vol-%           

 

Thinner: Water
Colour Cards: Symphony 2436
Product data sheet Safety Data Sheet - Helmi Furniture Paint
Helmi furniture paint semi-matt

Helmi Furniture Paint, Semi-matt

Suitable for new and previously painted wooden, chipboard, wood fibre board and metal surfaces. Also suitable for repainting of surfaces previously coated with an alkyd or acid catalysed paint. See instructions.


Not suitable for repainting of surfaces previously coated with nitrocellulose lacquers.

Coverage: 8-10 m2/l

Paint calculator
Application method:

Synthetic fiber brush, roller.

Conventional spray:

-pressure 3-4 bar

-nozzle 1.4-1.8 mm

-thinning 20-40 vol-%

Airless spray:

-nozzle pressure 140-160 bar

-nozzle 0.009˝-0.013˝

-thinning 0-5 vol-%

Air assisted airless spray:

-nozzle pressure 80-120 bar

-atomization air pressure 1-2 bar

-nozzle 0.009˝-0.011˝

-thinning 0-5 vol-%           

 

Thinner: Water
Colour Cards: Symphony 2436
Product data sheet Safety Data Sheet - Helmi Furniture Paint
Unica Akva

Unica Akva

Interior and exterior painting of new and previously painted or lacquered wood surfaces and primed metal surfaces. Ideal for maintenance painting of industrially painted, lacquered and with translucent finish treated surfaces.

Coverage: 7-9m2/litre
Paint calculator
Application method:

Synthetic fiber brush or short-napped roller, smoothing with brush

Conventional spray:

-nozzle 1.4-1.8 mm,  thinning 0-10 vol-%

Airless spray:

-nozzle 0.009˝-0.013˝, thinning 0-5 vol-%

 

Thinner: Water
Colour Cards: Symphony 2436
Product data sheet Safety Data Sheet - UNICA AKVA

Primer paints for doors

Feelings furniture primer 2.7 l

Feelings Furniture Primer

For use on interior substrates. Offers good adhesion, opacity and grain-filling properties, and provides a first-class foundation for subsequent coats of Feelings Furniture Paint. Feelings Furniture Primer can be used for repainting interior surfaces previously coated with waterborne, alkyd or acid catalysed paints.

Not suitable for repainting of surfaces previously coated with products including nitrocellulose.

Coverage: 6-8 m2/l per coat.  
The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.

Paint calculator
Application method: Brush, roller or spray application.  Polyester and nylon paint brushes are best suited for the application of Feelings Furniture Primer.  For airless spray use a 0.013” – 0.015” spray tip.
Thinning: if necessary thin by up to 10-5 % with water.

Thinner: Water
Colour Cards: Symphony 2436
Product data sheet Safety Data Sheet - Feelings Furniture Primer

Helmi Furniture Primer

For interior painting of wooden, chipboard, wood fibre board and metal surfaces. Also suitable for repainting surfaces previously coated with an alkyd or acid catalyzed paint.

Not suitable for repainting surfaces previously treated with nitrocellulose varnish.

Coverage: 6-8 m2/l per coat.  
The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.

Paint calculator
Application method:

Spray, roller or brush.

Airless spray:

-nozzle 0.013"-0.015"

-thinning 0-5 vol-%
Thinner: Water
Colour Cards: Symphony 2436
Product data sheet Safety Data Sheet - Helmi Primer
Jehu Alkyd Primer

Jehu

Suitable for priming and undercoating of wood, wood fibre board and card board surfaces.

Coverage: Approx. 10-15 m2/l, depending on the absorbency of the surface as well as on the spreading technique.
Paint calculator
Application method: Brush or roller.
Thinner: Alkyd thinner 2010
Product data sheet Safety Data Sheet - Jehu AP Base Paint
Otex Adhesion Primer

Otex - Adhesion Primer

Adheres well to surfaces that require special adhesion such as glass, tiles, glass fibre, PVC-plastic, aluminium, zinc coated sheet metal and surfaces coated with alkyd and catalytic paint

Coverage: 8-10 m2/l. Paint calculator
Application method: Methods: Brush, roller or spray. For airless spray application use a nozzle 0.011" - 0.015" i.e. 0.280 - 0.380 mm.
Thinning:  0 - 10 vol-%

Thinner: Spray Thinner 1032 and White Spirit 1050
Colour Cards: Symphony 2436
Product data sheet Safety Data Sheet - OTEX Adhesion Primer
Otex Akva

Otex Akva Adhesion Primer

Suitable for priming and undercoating both new and previously painted surfaces. Otex Akva adheres well on surfaces requiring special adhesion like glass, tiles, glass fibre, melamine, PVC-plastic, aluminium, zinc coated sheet metal and surfaces coated with alkyd and acid-curing paint. Suits also for wood, wood fibre board, chipboard and metal surfaces in dry interior premises. Not suitable for maintenance painting of surfaces painted with nitrocellulose lacquer.

Coverage:

6-8 m2/l

Paint calculator
Application method:

Brush, roller or spray

Airless spraying
- nozzle 0.013" - 0.015"
- thinning 0-5 % by volume
Thinner: Water
Colour Cards: Symphony 2436
Product data sheet


Colour cards

Brochures and guides
Browse or download
brochures
and
guides