Tikkurila uses cookies to ensure the best possible user experience. If you continue on our site, you will approve the use of cookies. Read more.
Tikkurila worldwide

A return to simplicity

Tunto

The reassuring warmth of burned clay. A modern adaptation of an age-old tradition, relaxing for both the eye and the mind.

Tunto

Feelings Interior Paint S486, Tunto Coarse L475 Jasper




 
 
S486 L475

Bordering with tape, floated finish

Difficulty level III Tool - roller Tool - steel trowel Tool - plastic trowel Tool - masking tape

Application

1.

Paint the wall with Feelings Interior Paint.

2.

Attach masking tape.

3.

Spread Tunto Coarse with a steel spatula in a coat only as thick as its grain size.

4.

Rub the surface immediately (i.e. within 15 minutes) by pressing down lightly with a plastic float trowel.

5.

Remove the masking tape as soon as the work is done.



Cleaning Tunto surfaces
Clean Tunto Fine surfaces with a clean, slightly moist cloth. Vacuuming is the best way to clean Tunto Coarse surfaces.

Products

Feelings Interior Paint

Feelings Interior Paint

Full-matt low-odour waterborne acrylate paint for use on interior walls and ceilings. Offers good wash-resistance. Suitable for plaster, concrete, filler treated, brick, cardboard surfaces, also for card-boarded gypsum board, chipboard and wooden fibre board surfaces.

Suitable for new and previously painted surfaces. Not suitable for painting doors or furniture.

Coverage: 10-12 m2/l for non-absorbing surfaces
7-9 m²/l for absorbing surfaces
The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.

Paint calculator
Application method: Brush, roller or spray application. For airless spray use a 0.017” – 0.021” spray tip.
Thinning: if necessary thin by up to 10% with water.
Thinner: Water
Colour Cards: Symphony 2436
Product data sheet Safety data sheet
Tunto_Karhea_9L[1]

Tunto Karhea - Coarse Textured Finish

Suitable for new or previously painted concrete, screeded surface, brick, wooden fibreboard, gypsum board or chipboard wall surfaces. TUNTO Coarse can also be applied on ceilings.

Coverage: 0,5 – 0,7 m²/l. Coverage is determined by the roughness and porosity of the surface, the painting method and painting conditions. Paint calculator
Application method: Steel trowel; for spray application use plaster pump or hopper gun, min. nozzle size 5 mm. Finish with Tikkurila plastic float. Before spray application, remove the small metal plate which may have dropped into the paint can during tinting.
Thinner: Water
Colour Cards: Tunto Fine and Coarse
Product data sheet Safety data sheet

Tunto Colour Card