Tikkurila uses cookies to ensure the best possible user experience. If you continue on our site, you will approve the use of cookies. Read more.
Tikkurila worldwide
(Previous date 15.12.2011)'

Feelings Interior Paint

Feelings Interior Paint
DESCRIPTION Waterborne acrylate paint
PRODUCT FEATURES Full-matt low-odour waterborne acrylate paint for use on interior walls and ceilings. Offers good wash-resistance. Suitable for plaster, concrete, filler treated, brick, cardboard surfaces, also for card-boarded gypsum board, chipboard and wooden fibre board surfaces.

Suitable for new and previously painted surfaces. Not suitable for painting doors or furniture.

RECOMMENDED USES For use on interior walls and ceilings.

  The paint is suitable for interior walls The paint is full-matt The paint is water-borne Tool: roller Tool: spray Tool: brush
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Base paints A and C
Colour Range Available in white and the complete Tikkurila Symphony Colour Collection.
Gloss grade Full-matt
Building material emission class M1
Coverage 10-12 m2/l for non-absorbing surfaces
7-9 m²/l for absorbing surfaces
The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.

Can sizes 0.9 l, 2.7 l, 9 l
Thinner Water
Application method Brush, roller or spray application. For airless spray use a 0.017” – 0.021” spray tip.
Thinning: if necessary thin by up to 10% with water.
Drying time at 23°C and 50% relative air humidity Normally touch-dry in ½ hour and recoatable after 1-2 hours.
Wet scrub resistance Wet scrub resistance SFS-EN 13300 class II, (ISO 11998).
Chemical resistance Resists cleaning chemicals and weak solvents, such as White Spirit.
Heat resistance 85°C, ISO 4211-2 and ISO 4211-3
Solids volume Approx. 40% depending on shade.
Density Approx. 1.3 kg/l, depending on shade, ISO 2811
Storage Protect from frost.
Product code 721_6001/3

Application conditions All surfaces to be painted must be dry, the temperature of the air at least +5°C and the relative humidity of the air below 80%.
Preparation Unpainted surfaces:
Remove all dirt and dust. If necessary, smooth the surface with a suitable Tikkurila Presto filler and sand the dried surface. Remove sanding dust. Prime with e.g. Feelings Universal Primer.

Previously painted surfaces:
Wash down previously painted surfaces with Maalipesu Cleaning Agent and rinse carefully with water. Sand hard or glossy surfaces to a matt finish and remove sanding dust. Fill holes and cracks with a suitable Presto filler and sand the dried surface. Remove sanding dust. Prime the surface with e.g. Feelings Universal Primer before coating, if necessary.
Painting Stir Feelings Interior Paint well before use and thin with water, if necessary. Apply one or two coats with a roller, brush or spray.
Cleaning of tools Clean with water immediately after use. Tikkurila Pensselipesu (Tool Cleaner) is recommended to be used for cleaning hardened paint from tools.
Maintenance instructions Earliest 1 month after treatment:
The surfaces can be cleaned with a dry brush, mop or cloth. Dirty surfaces can be cleaned with a neutral (pH 6-8) detergent using a damp cleaning equipment.
The surface must no be left wet after cleaning. Follow the instructions of the manufacturer for the detergent solution.

The product will achieve its final hardness and durability under normal conditions after 1 month, therefore the surfaces must be handled with care during this time. If the surfaces must be cleaned soon after treatment, use a dry or damp cloth or mop.
Maintenance treatment Surfaces treated with Feelings Interior Paint can be maintained with Feelings Interior Paint or a similar water-borne paint.
EU VOC 2004/42/EC-limit value (cat A/a) 30g/l(2010)
Feelings Interior Paint contains VOC max. 30 g/l.

according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Material Safety Data Sheet is available on request.Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT ADR: not classified
sre140113 / mli091106 / / lko141106 / ktu221106809- 721-