Room for creativity
|
Just about anything is possible when you get an idea. Why not think three-dimensionally, combine concepts unconventionally or create your own personalized living environment? |
|
|
Wall Feelings Interior Paint H487, pattern and fireplace white Tunto Coarse |
Application
|
| 1. |
Paint the wall with Feelings Interior Paint. |
| 2. |
Reflect the desired pattern on the wall with an overhead projector, and trace its outlines on to the wall. |
| 3. |
Mark out the pattern’s edges with masking tape. |
| 4. |
Spread Tunto Coarse with a spatula or with a steel trowel on smaller surfaces. Spread a coat only as thick as its grain size. |
| 5. |
Rub the surface immediately (i.e. within 15 minutes) by pressing down lightly with a plastic float trowel. |
| 6. |
Remove the masking tape as soon as the work is done. |
Cleaning Tunto surfaces
Clean Tunto Fine surfaces with a clean, slightly moist cloth. Vacuuming is the best way to clean Tunto Coarse surfaces. |
Products
|
|
Feelings Interior Paint |
|
Plaster, concrete, brick, building blocks and boards, MDF, wallpaper, etc. Feelings Interior Paint can be used for repainting interior surfaces previously coated with waterborne or alkyd paints. Feelings Interior Paint is also the recommended base coat for Feelings Effect Paint.
| Coverage: |
10-12 m2/l for non-absorbing surfaces
7-9 m²/l for absorbing surfaces
The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
|
| Application method: |
Brush, roller or spray application. For airless spray use a 0.017” – 0.021” spray tip.
Thinning: if necessary thin by up to 10% with water.
|
| Thinner: |
Water |
| Colour Cards: |
Tikkurila Symphony 2436 Colour Card |
|
Product data sheet
Material Safety Data Sheet - Feelings Interior Paint |
|
|
Tunto Karhea - Coarse Textured Finish |
|
Suitable for new or previously painted concrete, screeded surface, brick, wooden fibreboard, gypsum board or chipboard wall surfaces. TUNTO Coarse can also be applied on ceilings.
| Coverage: |
0,5 – 0,7 m²/l. Coverage is determined by the roughness and porosity of the surface, the painting method and painting conditions.
|
| Application method: |
Steel trowel; for spray application use plaster pump or hopper gun, min. nozzle size 5 mm. Finish with Tikkurila plastic float. Before spray application, remove the small metal plate which may have dropped into the paint can during tinting. |
| Thinner: |
Water |
| Colour Cards: |
Tunto, Colour card for textured finishes |
|
Product data sheet
Material Safety Data Sheet - TUNTO Coarse |
|
|
Tunto colours 
|
