Plaster, concrete, brick, building blocks and boards, MDF, wallpaper, etc. Feelings Interior Paint can be used for repainting interior surfaces previously coated with waterborne or alkyd paints. Feelings Interior Paint is also the recommended base coat for Feelings Effect Paint.

Coverage:	10-12 m2/l for non-absorbing surfaces 7-9 m²/l for absorbing surfaces The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
Application method:	Brush, roller or spray application. For airless spray use a 0.017” – 0.021” spray tip. Thinning: if necessary thin by up to 10% with water.
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet Material Safety Data Sheet - Feelings Interior Paint

Suitable for new or previously painted concrete, screeded surface, brick, wooden fibreboard, gypsum board or chipboard wall surfaces when a textured coating is desired. TUNTO Fine can also be applied on ceilings.

Coverage:	1-9m2/l depending on the painting method as follows: - thick rolling 1-1,5m2/l - thin rolling 4-5 m2/l - brushing 2-2,5m2/l - thick spatula 2-2,5m2/l - thin spatula 7-9m2/l
Application method:	Apply with roller and for patterning use e.g. a wide brush, wallpaper knife, firm brush or patterning roller. Thinning: With water
Thinner:	Water
Colour Cards:	Tunto, Colour card for textured finishes
Product data sheet Material Safety Data Sheet - TUNTO Fine