An exotic Oriental sitting room 

For interior painting on wooden, wood fibre board, particle board and metallic surfaces and plasterboard (gypsum board), concrete and similar surfaces.

Coverage:	6-8 m2/l.
Application method:	Brush, effect roller, spray. For application use a short-pile roller. Use brush or effect roller to create different surface patterns. Conventional spray: fluid nozzle 1.8mm, thinning up to 40 % with water. Thinner: if necessary thin with water
Thinner:	Water
Colour Cards:	Taika Pattern and Colour Guide
Product data sheet Material Safety Data Sheet - TAIKA Pearl Paint

Plaster, concrete, brick, building blocks and boards, MDF, wallpaper, etc. Feelings Interior Paint can be used for repainting interior surfaces previously coated with waterborne or alkyd paints. Feelings Interior Paint is also the recommended base coat for Feelings Effect Paint.

Coverage:	10-12 m2/l for non-absorbing surfaces 7-9 m²/l for absorbing surfaces The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
Application method:	Brush, roller or spray application. For airless spray use a 0.017” – 0.021” spray tip. Thinning: if necessary thin by up to 10% with water.
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet Material Safety Data Sheet - Feelings Interior Paint

Interior walls in rooms on surfaces which have been previously painted with Feelings Interior Paint. Not suitable for painting doors or furniture.

Coverage:	13-18 m2/l. depending on application method. The above should be used as a guide, as actual spreading rates will depend upon many factors including texture and porosity of the substrate.
Application method:	Brush or roller application. Finishing with effect roller, brush or other patterning tool.
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet Material Safety Data Sheet - Feelings Effect Paint