Tikkurila worldwide
PRODUCT DATA SHEET
28.05.2015
(Previous date 01.11.2012)'

Nostalgia Beeswax Oil

Nostalgia Beewax Oil-suur
DESCRIPTION Natural coloured oil for wooden surfaces.
PRODUCT FEATURES

Suitable for dry wood surfaces indoors. Makes dirt repellent, beautiful silky matt surface. Does not withstand water and high stress.

RECOMMENDED USES Furniture, wall and ceiling panels, wooden doors in dry interior premises. Nostalgia Beeswax Oil can be used for wooden items, but it is not suitable for children's wooden toys.

TECHNICAL DATA
  The paint is suitable for exterior walls Tool: brush
The coverage of the paint on rough surfaces
15
The coverage of the paint on smooth surfaces
25
Coverage 15-25 m2/l depending on the porosity of the surface.
Can sizes 0.375 l
Application method Spread with non-fluffy rag or brush.
Drying time at 23°C and 50% relative air humidity Oil is absorbed into the wood and excess oil is wiped off. Absorbing takes about 30 minutes. The surface withstands light stress after 1-3 days from treatment. The final durability is achieved after few weeks.
Solids volume approx 94 w %.
Density 0.8 kg/l, ISO 2811.
Storage Unaffected by cold storage or transportation.

APPLICATION DETAILS
Application conditions The surface to be treated must be dry, the temperature of the air at least +5 oC , and the relative humidity of the air below 80%.
Preparation Remove dirt and dust, sand the surface, if necessary, dust off.
Treatment Spread Nostalgia Beeswax Oil on the surface, and let it absorb about 30 min. Wipe off the excess unabsorbed oil. Finish the surface by rubbing it with a non-fluffy cotton cloth in direction of the wood grain.
Cleaning of tools Clean the tools first with soap and warm water, remove the rest using Tikkurila White Spirit 1050.
Maintenance instructions Handle the surfaces with care during few weeks after the treatment as the product achieves its final hardness and durability after few weeks in normal conditions. If the surfaces need to be cleaned soon after surface treatment, clean them lightly with a soft brush or damp cloth. Remove stains as soon as possible with a damp cloth and neutral (pH 6-8) detergent. If necessary, sand the stains and renew the Nostalgia Beeswax Oil treatment.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous, according to EC, Directive 99/45/EC. A Safety Data Sheet is available on request.Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations.
TRANSPORT -
sre180711 / ome200711