 |
PRODUCT DATA SHEET 02.09.2011 |
|
Valtti Base - Wood priming oil |
|
|
| DESCRIPTION | Priming oil for use on exterior wood. | |
| PRODUCT FEATURES | For protection and priming of timber and wooden structures before surface treatment. Suitable for sawn and planed timer, woodwork, logs, thermally treated and impregnated wood in exterior use.
Finishing coats are recommended to be applied as soon as possible, because colourless priming oil does not protect the wood surface from the adverse effects of sunlight. |
|
| RECOMMENDED USES | - | |
| TECHNICAL DATA | ||
 4  5 |
||
| Colour Range | Colourless | |
| Coverage | 4-5 m2/litre |
|
| Can sizes | 0.9 l, 2.7 l and 9 l | |
| Thinner | White Spirit 1050 | |
| Mixing ratio | Use unthinned. | |
| Application method | brush, dip or spray |
|
| Drying time at 23°C and 50% relative air humidity | Normally touch-dry in ½ hour and recoatable after 24 hours. | |
| Solids volume | 7 % | |
| Density | n. 0.8 kg/l, ISO 2811. | |
| Storage | Unaffected by cold storage. Poorly closed or short canisters do not endure long storing. | |
| APPLICATION DETAILS | ||
| Application conditions | The surface must be dry, the temperature of the air at least +5 oC during treatment and drying, and the relative humidity of the air below 80 %. | |
| Preparation | Remove dirt, mould and any loose material. If needed, use Mould Removal (Homeenpoisto) or Tehopesu (Power Clean) solution according to directions of use. Protect other surfaces and plants from splashes of Valtti Base specially in spray application. | |
| Diluting | Use unthinned. | |
| Priming |
Treat wood surfaces with Valtti Base in as early construction phase as possible. Apply by brush, dipping or spray. Treat end-grain carefully. Apply the finishing coat as soon as possible, anyway not earlier than after 24 hours of priming. |
|
| Cleaning of tools | Clean immediately after use with White Spirit 1050 or with Tikkurila Tool Cleaner (Tikkurila Pensselipesu). | |
| HEALTH AND SAFETY CLASSIFICATION | Harmful x Contains: Naphtha, hydrotreated heavy, 3-iodo-2-propynyl butylcarbamate (0,75 w-%) and propiconazole (0,24 w-%). HARMFUL: MAY CAUSE LUNG DAMAGE IF SWALLOWED. HARMFUL TO AQUATIC ORGANISMS, MAY CAUSE LONG-TERM ADVERSE EFFECTS IN THE AQUATIC ENVIRONMENT. Do not breathe vapour/spray. Use only in well-ventilated areas. Avoid contact with skin. Wear suitable gloves. If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label. Do not empty into drains. Keep out of reach of children. Contains propiconazole. May produce an allergic reaction. A Material Safety Data Sheet is available on request. Material Safety Data Sheet - Valtti Base | |
 Harmful |
||
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Avoid spillage into drains, water systems and soil. Any product remaining unused and dried paint waste must be disposed of as hazardous waste. Empty, dry cans should be recycled or disposed of in accordance with local regulations. Risk of self-ignition! Cleaning cloths, sanding dust or overspray containing the product can create fire by self-ignition. Waste like this should be collected and stored in water before disposal, or dried preferably outdoors or incinerated immediately. | |
| TRANSPORT | VAK/ADR - | |
| sre101110/akk311210/lko191106// 0050500 | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
