Masonry facades

Suitable for new or previously treated interior or exterior masonry surfaces in residential, commercial and storage premises. Hydrosol Primer penetrates well into the surface, strengthens the substrate, evens out its absorbency and improves the adhesion of the finishing paint.

Coverage:	Approx. 4-8 m2/l, depending on the absorbency and roughness of the surface as well as the previous surface treatment.
Application method:	Recommended method: apply with a low-pressure spray ("Backpack garden sprayer"). Can also be applied by brush or roller.
Thinner:	Water
Product data sheet Material Safety Data Sheet - Hydrosol Primer

For screeded surfaces of concrete blocks. Also suitable for concrete surfaces such as socle facades, front and side panels of balconies or other exterior concrete structures. Minimum grain size approx. 2 mm.

Coverage:	0.6-0.8m²/ l. Coverage is determined by the roughness and porosity of the surface, the painting method and painting conditions.
Application method:	Steel trowel; for spray application, use plaster pump, min. nozzle size 5 mm. Finish with Tikkurila plastic float.
Thinner:	Water
Colour Cards:	Colour Card for Exterior Paints and Facade Colour Card for mineral surfaces
Product data sheet Material Safety Data Sheet - YKI rough coating

-

Coverage:	4-6 m²/ l, one coat. Coverage is determined by roughness and porosity of the surface, painting method and painting conditions.
Application method:	Brush, roller or spray. For airless spray application, use a nozzle 0.027" - 0.029", handle filter 0.56 mm
Thinner:	Water
Colour Cards:	Colour Card for Exterior Paints and Facade Colour Card for mineral surfaces
Product data sheet Material Safety Data Sheet - YKI paint for socles