|
Teho - Oil Paint |
|
For sawn and planed wooden surfaces, as well as for impregnated wooden surfaces outdoors according to directions for use.
|
|
Ultra Matt |
|
Wooden exterior walls, weatherboards, fences etc.
| Coverage: |
Sawn wood surfaces 4 - 6 m2/l. Planed and previously painted surfaces 7 - 9 m2/l.
|
| Application method: |
Spray or brush.
Airless spray
-nozzle 0.018" - 0.023" i.e. 0.460 - 0.580 mm
-thinning 0 - 10 vol-%
|
| Thinner: |
Water |
| Colour Cards: |
Colour Card for Exterior Paints |
|
Product data sheet
|
|
|
|
Unica Super - Urethane Alkyd Lacquer, gloss |
|
Unica Super is suitable for application on interior and exterior wooden surfaces. Tinted product gives better protection against sunlight than untinted product.
| Coverage: |
12 - 14 m2/l per coat.
The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
|
| Application method: |
Brush or spray. For airless spray use a nozzle 0.009" - 0.013" (0.230 - 0.330 mm).
Thinning: if necessary thin up to 10 vol-% with white spirit 1050.
|
| Thinner: |
White Spirit 1050 |
| Colour Cards: |
Interior Lacquer Colour Card |
|
Product data sheet
Material Safety Data Sheet - UNICA SUPER Lacquer gloss and semi-gloss |
|
|
|
Unica Super - Urethane Alkyd Lacquer, semi-gloss |
|
Unica Super is suitable for application on interior and exterior wooden surfaces.
| Coverage: |
12 - 14 m2/l per coat.
The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
|
| Application method: |
Brush or spray. For airless spray, use a nozzle 0.009" - 0.013" (0.230 - 0.330 mm).
Thinning: If necessary thin up to 10 vol-% with white spirit 1050.
|
| Thinner: |
White Spirit 1050 |
| Colour Cards: |
Interior Lacquer Colour Card |
|
Product data sheet
Material Safety Data Sheet - UNICA SUPER Lacquer gloss and semi-gloss |
|
|
Valtti Akvabase |
|
For protection and priming of timber and wooden structures before
surface treatment. Suitable for sawn and planed timer, woodwork, logs,
thermally treated and impregnated wood in exterior use.
Finishing coats are recommended to be applied as soon as possible,
because colourless priming oil does not protect the wood surface from the
adverse effects of sunlight.
|
|
|
Valtti Akvacolor |
|
Timber cladding, weatherboarding, windows, facias, fencing, sheds, garden furniture, log cabins, etc. Do not use Valtti Akvacolor for any other purposes than those indicated in the instructions for use.
| Coverage: |
Smooth wood: 8-12 m2/litre per coat. Sawn wood: 4-8 m2/litre per coat. Actual spreading rates will depend upon many factors including texture, porosity and moisture content of the substrate.
|
| Application method: |
Brush or spray.
For airless spray: use a 0.009” – 0.013” spray tip.
Note: polyester and nylon paint brushes are best suited for the application of Valtti Akvacolor.
|
| Thinner: |
Water |
| Colour Cards: |
Semi-transparent Wood Finishes Colour Card |
|
Product data sheet
Material Safety Data Sheet - VALTTI Akvacolor |
|
|
Valtti Base |
|
For protection and priming of timber and wooden structures before
surface treatment. Suitable for sawn and planed timer, woodwork, logs, thermally
treated and impregnated wood in exterior use.
Finishing coats are recommended to be applied as soon as possible,
because colourless priming oil does not protect the wood surface from the
adverse effects of sunlight.
|
|
Valtti Color |
|
Valtti Color is suitable for logs, sawn and planed wood surfaces, various wood boards, as well as for impregnated wood and heat treated wood surfaces for exterior use. Do not use Valtti Color for any other purposes than those indicated in the instructions for use.
|
|
Valtti Color Extra |
|
Valtti Color Extra enhances the natural beauty of wood
whilst offering good water repellency, flexibility, durability and protection
against the effects of moisture and UV-light. Do not use Valtti Extra for any
other purposes than those indicated in the instructions for use. Not recommended
for timber surfaces.
| Coverage: |
Smooth wood: 8-12 m2/litre per coat. Sawn wood: 4-8 m2/litre per coat. Actual spreading rates will depend upon many factors including texture, porosity and moisture content of the substrate.
|
| Application method: |
Brush or spray.
For airless spray: use a 0.009” – 0.013” (0.23 – 0.33mm) spray tip.
Thinning: Alkyd Thinner 2010
|
| Thinner: |
Alkyd thinner 2010 |
| Colour Cards: |
Lapponia and Semi-transparent Wood Finishes Colour Card |
|
Product data sheet
|
|
|
|
Valtti Color Satin |
|
Valtti Color Satin is suitable for untreated wood as well as previously treated wood. Valtti Color Satin penetrates well into the timber and protects wood against weathering by slowing down moisture penetration and the effects of sun light.
| Coverage: |
Planed wood: 8-12 m2/litre per coat. Sawn wood: 4-8 m2/litre per coat. Actual spreading rates will depend upon many factors including texture, porosity and moisture content of the substrate.
|
| Application method: |
Methods: brush or spray.
For airless spray: use a 0.009” – 0.013” (0.23 – 0.33mm) spray tip.
Thinning: Valtti Color Satin requires no thinning.
|
| Colour Cards: |
Semi-transparent Wood Finishes Colour Card |
|
Product data sheet
|
|
|
Valtti Furniture and Decking Oil Brown |
|
Suitable for surface oil treatment and colouring
hardwoods brown for outdoor use. Also suitable for thermowood, impregnated and
untreated wood, as well as wood previously treated with oil. The final colour
of the surface will depend on the original wood colour. Always test before application.
|
|
Valtti Non-Slip |
|
Protects exterior wooden surfaces. Suitable for impregnated (pressure-treated), heat-treated and untreated wood, as well as wood previously treated with oil.
|
|
Valtti Opaque (Vinha) |
|
Offers good weather resistance, flexibility and an extremely durable low-maintenance finish. Valtti Opaque is moisture regulating and will not crack, peel or blister.
| Coverage: |
Smooth wood: 8-10 m2/l per coat. Sawn wood: 4-8 m2/l per coat. Wet-film thickness approximately 100-250µm per coat, dry-film approximately 40-100µm per coat. Actual spreading rates will depend upon many factors including texture, porosity and moisture content of the substrate.
|
| Application method: |
Brush or spray. Polyester and nylon paint brushes are best suited for the application of Valtti Opaque.
For airless spray: use a 0.018” – 0.023” spray tip.
|
| Thinner: |
Water |
| Colour Cards: |
Vinha - Valtti Opaque Colour Card |
|
Product data sheet
Material Safety Data Sheet - Valtti Opaque |
|
|
Valtti Puuöljy (Wood Oil) |
|
Suitable for clean wood or previously treated with oil for outdoor use, also for hardwood, thermowood, impregnated and untreated wood.
|
|
Valtti Puuöljy Akva (Wood Oil Akva) |
|
Suitable for oiling of exterior wood surfaces, also for hardwood, impregnated and heat treated wood as well as untreated wood.
|
|
Valtti Ulkovaha - Exterior Wax |
|
Suitable for exterior sawn and planed softwood and hardwood surfaces. Also suitable for impregnated and thermally modified wood.
|
