 |
PRODUCT DATA SHEET 19.01.2009 |
|
Valtti Puuöljy (Wood Oil) |
|
|
| DESCRIPTION | Solvent-borne wood oil for outdoor use. | |
| PRODUCT FEATURES | Suitable for clean wood or previously treated with oil for outdoor use, also for hardwood, thermowood, impregnated and untreated wood. |
|
| RECOMMENDED USES | Garden furniture, terraces, jetties. | |
| TECHNICAL DATA | ||
 5  7 |
||
| Base paints | EC | |
| Colour Range | Colourless. Tinted according to Semi-transparent Wood Finishes colour card. | |
| Gloss grade | undefined | |
| Coverage | approx. 5 - 7 m2/l. | |
| Can sizes | 0.9 l, 2.7 l and 9 l | |
| Thinner | White Spirit 1050 | |
| Application method | Brush or sponge. | |
| Drying time at 23°C and 50% relative air humidity | Surface dries in several hours. The porosity of the base and the amount of oil used affects the drying time. Apply the second coat as soon as the surface is dry. | |
| Weather resistance | We recommend tinting the product to provide better weather resistance than a colourless product.
Carry out maintenance if necessary. Surfaces continuously exposed to the weather may need to be treated annually. |
|
| Solids volume | 18 %. | |
| Density | 0.8 kg/l, ISO 2811. | |
| Storage | Unaffected by cold storage or transportation Once opened, use up the product in the can during the same work project. Product characteristics may vary in half-empty cans. | |
| APPLICATION DETAILS | ||
| Application conditions | The surface to be treated must be dry and relative wood moisture content less than 20 %, as damp wood will not absorb oil, which dries slowly. As impregnated wood is often damp, we recommend treatment after a 6-month drying period.
During treatment and drying, air, surface, and product temperature must be at least +5 º C and relative air humidity less than 80%. |
|
| Preparation | Untreated surfaces:
Remove all dirt, dust and loose material from the surface. Wash off mould with Tikkurila Homeenpoisto (Mould Removal) or Tikkurila Tehopesu (Super Clean) according to instructions. Surface previously treated with wood oil: Remove loose material from the surfaces with a scraper or wire brush. Clean and wash if necessary with Homeenpoisto (Mould Removal) or Tehopesu (Super Clean) according to instructions. If a clear film remains on the surface, remove it before treatment. |
|
| Application | Stir Valtti Wood Oil thoroughly before and during use. To avoid overlapping, apply 1-2 coats of oil in continuous strokes to cover the whole surface evenly.
Wipe off excessive oil immediately. Apply the second coat as soon as the surface is dry. Oil treatment will make the wood colour darker. Carry out maintenance if necessary. Surfaces continuously exposed to the weather may need to be treated annually. |
|
| Cleaning of tools | White Spirit 1050 or Tikkurila Pensselipesu (Tool Cleaner) | |
| Maintenance instructions | After application, treat the surface carefully for the first week to allow it to harden completely. After two days, gently clean the surface with a soft brush or mop if necessary.
Clean dirty surfaces with Tikkurila Huoltopesu Maintenance Cleaner (1 part of Maintenance Cleaner to 10 parts water). Remove stains and clean very dirty surfaces with a stronger solution of Maintenance Cleaner (1:1). After washing, rinse the surfaces and allow to dry. |
|
| HEALTH AND SAFETY CLASSIFICATION | Harmful, Xn Contains: Naphtha, hydrotreated heavy (aliphatic hydrocarbon solvent), solvent naphtha, light aromatic and tolylfluanid FLAMMABLE. HARMFUL BY INHALATION. HARMFUL: MAY CAUSE LUNG DAMAGE IF SWALLOWED. HARMFUL TO AQUATIC ORGANISMS, MAY CAUSE LONG-TERM ADVERSE EFFECTS IN THE AQUATIC ENVIRONMENT. Do not breathe solvent vapour. Use only in well-ventilated areas. If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label. Do not empty into drains. Keep out of the reach of children. Contains ethyl methyl ketoxime and tolylfluanid. May produce an allergic reaction. A Material Safety Data Sheet is available at request. Material Safety Data Sheet - VALTTI Wood Oil | |
 Harmful |
||
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations. NOTE! Cleaning cloths or sanding dust con¬taining the product can create fire by auto-igniti¬on and should be stored in water before dis¬posal, or be dried outdoors or incinerated imme¬diately. | |
| TRANSPORT | VAK/ADR 3 III | |
| dco111008/ ofl090309/mli130109/ars190109//257 0070 | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
