 |
PRODUCT DATA SHEET 27.02.2008 |
|
Pika-Teho - House paint |
|
|
| DESCRIPTION | Oil-modified acrylate paint | |
| PRODUCT FEATURES | For new, untreated or industrially primed or previously painted wooden surfaces treated with exterior house paints. | |
| RECOMMENDED USES | Exterior wooden walls, weatherboards, fences etc. | |
| TECHNICAL DATA | ||
 4  9 |
||
| Base paints | A and C | |
| Colour Range | Tikkurila Colour Card of Exterior Paints and Facade Colour card. | |
| Gloss grade | Matt | |
| Coverage | Sawn wooden surfaces 4 - 6 m2/l. Planed and previously painted wooden surfaces 7 - 9 m2/l. |
|
| Can sizes | 0.9 l, 2.7 l, 9 l, 18 l and 0.225 l | |
| Thinner | Water | |
| Application method | Brush or spray Airless spray - nozzle 0.018" - 0.023" i.e. 0.460 - 0.580 mm - thinning 0 - 10 vol.-% |
|
| Drying time at 23°C and 50% relative air humidity | Touch dry after appr. 1 hour. Recoatable after 2-4 hours under normal conditions. At lower temperatures and during damp weather the drying time is longer. | |
| Weather resistance | Good. Also in industrial atmosphere. | |
| Solids volume | n. 39 %. | |
| Density | n. 1.3 kg/l, ISO 2811. | |
| Storage | Protect from frost | |
| Product code | 250_6001/3 | |
| APPLICATION DETAILS | ||
| Application conditions | The surface to be treated must be dry, the temperature of the air at least +5 °C, and the relative humidity of the air below 80 % during painting and drying. | |
| Preparation | New untreated wooden surfaces:
Remove dirt and loose material from new surfaces. Wash off mold with Tikkurila Homeenpoisto (Mold Removal) or with Tehopesu (cleaning agent) according the directions for use. Prime surfaces as soon as possible with Valtti Pohjuste priming oil. Protect rusting parts, e.g. nail heads, with Rostex anti-corrosive primer. Remove loose resin from knots and treat them with Oksalakka knotting lacquer. Finish with two coats of Pika-Teho. Maintenance painting: Remove loose material from previously treated surfaces with scraper and steel brush. Wash down dirty and moulded surfaces with Homeenpoisto (Mould Removal) solution or with Tehopesu (cleaning agent) according to directions for use. Treat bare wooden surfaces with Valtti Pohjuste priming oil and prime them once with Pika-Teho. Finish the surfaces with one or two coats of Pika-Teho depending on the colour difference and condition of the surface. |
|
| Painting | Stir Pika-Teho well and thin with water, if necessary. Apply Pika-Teho with brush or airless spray.
Reserve enough Pika-Teho for one uniform surface and mix into one can to avoid possible colour differences. |
|
| Cleaning of tools | Clean tools with water. | |
| Maintenance instructions | Handle the surface with care, ultimate durability is reached in approx. 4 week. After treatment surface can be cleaned lightly with a soft brush, a damp rag or a mop.
The surface can be cleansed with Huoltopesu at the earliest. 1 month after the painting work (1 part of Huoltopesu to 10 parts of water). Clean stains and dirty surfaces with a stronger (1:1) solution. Rinse surfaces and let dry. |
|
| EU VOC 2004/42/EC-limit value | (cat A/d) 130g/l(2010) Pika-Teho contains VOC max. 130g/l.
|
|
| HEALTH AND SAFETY CLASSIFICATION | Irritant, Xi Contains: Octyl-isothiazolone and zinc oxide MAY CAUSE SENSITIZATION BY SKIN CONTACT. HARMFUL TO AQUATIC ORGANISMS, MAY CAUSE LONG-TERM ADVERSE EFFECTS IN THE AQUATIC ENVIRONMENT. Do not breathe spray. Use only in well-ventilated areas. Avoid contact with skin. Wear suitable protective gloves. Do not empty into drains. If swallowed, seek medical advice immediately and show this container or label. Keep out of the reach of children. A Material Safety Data Sheet is available on request.Material Safety Data Sheet - PikaTeho | |
 Irritant |
||
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations. | |
| TRANSPORT | VAK/ADR - | |
| ssa270208/mhj240608/AMP240593/ENI240593/EC050301 | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
