PRODUCT DATA SHEET
(Previous date 17.04.2013)'
Valtti Arctic - Waterborne, natural-oil-based pearlescent wood stain.
|DESCRIPTION||Waterborne, natural-oil-based pearlescent wood stain. The binder in Valtti Arctic is vegetable oil alkyd.|
Valtti Arctic protects the wood against weathering and retards the absorption of moisture into the wood. It gives also protection against sun light.
|RECOMMENDED USES||Exterior walls, fences and milieu constructions, untreated or previously with translucent wood stains treated wood structures. Suitable for logs, sawn and planed wood surfaces, impregnated and thermally modified wood.|
|Colour Range||Tinting according to Tikkurila Arctic colour card.
Always use a tinted product. The final colour can be seen after the surface has dried.
|Coverage||For sawn wood surfaces 4-8 m²/l, for logs and planed wood surfaces 8-12 m²/l.|
|Can sizes||0.9 l, 2.7 l and 9 l|
|Drying time at 23°C and 50% relative air humidity||Touch-dry after 2-3 hours, recoatable after 24 hours. Avoid mechanical stress during the first days after the application as the surface has not achieved its final hardness yet.|
|Solids volume||Approx. 26% depending upon the colour.|
|Density||n. 1.0 kg/l, ISO 2811.|
|Storage||Protect from frost. Close an opened can carefully. Use the contents of an opened can during the same painting period, product properties may change in a partially filled can.|
|Application conditions||The surface to be painted must be dry and the relative moisture content of wood less than 20 %. During treatment and drying the temperature of the air, surface and product must be at least +5ºC and the relative humidity of the air below 80 %. Working properties are best during calm, cloudy and dry weather around temperatures +10 º-+20 º C|
Remove dirt, dust and loose material with steel brush or scrubbing brush. Wash down surfaces affected by mould with Tikkurila Mould Removal solution or Tehopesu Super Clean according to instructions. Prime the surface as soon as possible with Valtti Base or Valtti Akvabase. Protect any plants from splashes of Valtti Base or Valtti Akvabase.
Surfaces previously treated with wood stain:
Remove any loose material and grey wood fiber by scraper and/or steel brush. Clean the surface and wash down with Mould Removal or Tehopesu Super Clean if necessary. Prime bare wood with Valtti Base or Valtti Akvabase. In case of an obvious, possibly glossy film on the surface, remove it or sand it thoroughly.
|Finishing||Reserve enough tinted Valtti Arctic mixed in a single can to avoid possible colour differences. Stir Valtti Arctic well before use and frequently during application.
Apply Valtti Arctic continuously and evenly the entire length of the log or few boards at a time to avoid overlaps. Treat the end grains of wood with particular care. Treat the surfaces twice, thin layers on planed and log surfaces. Always use tinted product for new untreated surfaces.
Check the condition of the surface and maintain when necessary, when the product is worn away from the surface. Factors affecting maintenance intervals include the location, compass orientation and weather conditions.
Check the condition of the timber and the functionality of the log structure before applying the finishing coat. See more information at:
|Cleaning of tools||Clean tools with soap (or equivalent detergent) and rinse with water. Tikkurila Pensselipesu Tool Cleaner is recommended for removal of hardened wood stain.|
|Maintenance instructions||After application, the surface must be treated gently as it achieves its final hardness and durability after 4 weeks under normal conditions. Soon after the application the surface can be cleaned gently with a soft brush, damp cloth or mop. Dirty surfaces can be cleaned earliest
1 month after the application with Tikkurila Huoltopesu Maintenance Cleaner (1 part of Maintenance Cleaner to 10 parts water). Remove stains and clean very dirty surfaces with a stronger solution of Maintenance Cleaner (1:1). After washing, rinse the surfaces and allow to dry.
|Maintenance treatment||Check the condition of the treated surface and make maintenance treatment when necessary. The maintenance interval is affected by the location, point of compass and weather conditions.
|EU VOC 2004/42/EC-limit value||(cat A/e) max. 130g/l(2010)
Valtti Arctic contains VOC max.130 g/l.
HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
|The product is not classified as dangerous. Safety data sheet|
|ENVIRONMENTAL and WASTE DISPOSAL||Recycle empty cans or dispose them of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations for hazardous waste. Risk of self-ignition! Cleaning cloths or sanding dust containing the product can create fire by self-ignition and should therefore be stored in water before disposal, or dried outdoors or incinerated immediately. isk of self-ignition! Cleaning cloths, sanding dust or overspray containing the product can create fire by self-ignition. Waste like this should be collected and stored in water before disposal, or dried preferably outdoors or incinerated immediately.|
|TRANSPORT||ADR: not classified|
|sre030613 / lko011009 / ome021009 sre011009 / 5966404|