 |
PRODUCT DATA SHEET 13.02.2008 |
|
Feelings Moisture Stop |
|
|
| DESCRIPTION | - | |
| PRODUCT FEATURES | Plaster, building blocks and boards, etc. Feelings Moisture Stop can be used on interior surfaces previously coated with waterborne, alkyd or acid catalysed paints and glass-fibre wall coverings. | |
| RECOMMENDED USES | Particularly suitable for wet areas of kitchens, bathrooms, shower rooms, utility rooms, swimming pool areas etc. | |
| TECHNICAL DATA | ||
 4  6 |
||
| Colour Range | Translucent green. | |
| Coverage | 4-6 m2/l unthinned. The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method. |
|
| Can sizes | 3 l, 10 l. | |
| Thinner | Water | |
| Application method | Brush, roller or spray application. Thinning: when necessary, thin with water. |
|
| Drying time at 23°C and 50% relative air humidity | Normally touch-dry in 4 hours and recoatable after 4 hours. |
|
| Solids volume | Approx. 39% | |
| Density | Approx. 1.2 kg/l | |
| Storage | Protect from frost. | |
| Product code | 005_3457 | |
| APPLICATION DETAILS | ||
| Application conditions | All surfaces to be painted must be dry, the temperature of the air at least +10OC and the relative humidity of the air below 80%. | |
| Preparation | Surfaces must be clean, dry, and free from grease, dirt, oil, wax, rust, all loose material and surface contamination. Use recommended Tikkurila products as cleaning agents and for mould removal. Use a recommended Tikkurila wet-room filler for filling cracks, nail holes, blemishes, etc., as well as for leveling uneven walls and ceilings. Ensure that existing glossy, gloss painted and filled surfaces are thoroughly flatted down. Ensure that all surfaces are thoroughly prepared. | |
| Installation | Stir the paint thoroughly and apply two coats of Feelings Moisture Stop overall, allowing 1-4 hours between coats. Thin the first coat with water (one part moisture stop and one part water).
When using Feelings Moisture Stop in conjunction with glass-fibre wall coverings, the second coat of Moisture Stop should be applied on top of and overall the wall covering. |
|
| Cleaning of tools | Clean with water immediately after use. Tikkurila Pensselipesu (Tool cleaner) is recommended for removing hardened paint. | |
| EU VOC 2004/42/EC-limit value | (cat A/g) 50g/l(2007)/ 30g/l(2010) Feelings Moisture Stop contains VOC max. 50g/l. | |
| HEALTH AND SAFETY CLASSIFICATION | The product is not classified as dangerous. A Material Safety Data Sheet is available on request. Material Safety Data Sheet - Feelings Moisture Stop | |
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations. | |
| TRANSPORT | VAK/ADR - | |
| ssa130308/ars200308/mpy251005/0053457 | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
