Tikkurila uses cookies to ensure the best possible user experience. If you continue on our site, you will approve the use of cookies. Read more.
Tikkurila worldwide
PRODUCT DATA SHEET
12.07.2016
(Previous date 10.11.2014)'

Luja Moisture Stop

Luja_Kosteussulku_10L[1]
DESCRIPTION Water-borne moisture stop which gives a very impervious surface.
PRODUCT FEATURES

For interior use. Suitable for surfaces treated with Tikkurila Presto LV Humid Room Filler, and on various building boards, glass fibre wallpapers etc.


RECOMMENDED USES Interior walls and ceilings.

TECHNICAL DATA
  The paint is suitable for interior walls The paint is water-borne Tool: roller Tool: spray Tool: brush
The coverage of the paint on rough surfaces
4
The coverage of the paint on smooth surfaces
6
Colour Range Translucent green
Coverage Approx. 4 - 6 m2/l, two coat applied, unthinned.
Can sizes 3 l, 10 l.
Thinner Water
Application method Brush, roller or spray.
Curing Touch dry in approx. 4 hours. Re-coatable with Luja finishing paint after approx. 4 hours.
Solids volume Approx. 39 %.
Density 1.2 kg/l, ISO 2811
Storage Protect from frost.

APPLICATION DETAILS
Application conditions The surface to be painted must be dry, the temperature of the air at least +10 °C, and the relative humidity of the air below 80 %.
Preparation Remove all dirt and dust. If surface to be treated has mould damages, find out the reason for them and repair them carefully before painting. Remove loose, flaking paint with a scraper. Remove vinyl wall coverings and ceramic tiles in full. Sand glossy paint surfaces to a matt finish. Wash the surface with Maalipesu (Cleaning Agent), if necessary and rinse carefully with water. Fill concrete, plaster etc. surfaces with Presto LV Humid Room Filler. Sand the surface and remove sanding dust
Installation Stir Luja moisture stop well before use. Apply two coats of moisture stop with a roller and finish off corners and inlets by brush. Allow to dry for 1-4 hours between treatments.

Finish with Luja Finishing Paint after approx. 4 hours from the second treatment with moisture stop.
Cleaning of tools Wash tools with water. Tikkurila Pensselipesu (Tool Cleaner) is recommended for removing slightly hardened paint.
EU VOC 2004/42/EC-limit value (cat A/i) 140g/l (2010) Luja Moisture Stop contains VOC max. 140g/l

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available on request.Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT VAK/ADR -
ser310816 / linla071114 / inh210604 / pih121015 / 0053457