Tikkurila worldwide
Tikkurila PRODUCT DATA SHEET
16.07.2007

Optiva Kolor

DESCRIPTION Acrylic dispersion paint for walls and ceilings
PRODUCT FEATURES For use on interior walls and ceilings for residential areas and offices.
RECOMMENDED USES Painting of cement-lime boards, chipboard, filler treated, concrete. We can use Optiva Kolor for renovation of previously painted surfaces.

TECHNICAL DATA
  The paint is suitable for interior walls The paint is full-matt Tool: roller Tool: spray Tool: brush Painting conditions: relative humidity of the air below 80% and the temperature of the air at least +5ºC
The coverage of the paint on rough surfaces
10
The coverage of the paint on smooth surfaces
10
Base paints AP and C
Colour Range Available in white and the complete Optiva Kolor Collection.
Gloss grade Full-matt
Coverage Up to 10 m2/litre per coat.  Actual spreading rates will depend upon many factors including texture, porosity and application method.
Can sizes 0.9 l, 2.7 l, 9 l
Application method

Brush, roller or spray

Drying time at 23°C and 50% relative air humidity

Dust dry in approx.: 40 min. and recoatable after 2 - 3 hours.

Wear resistance 3rd class (ISO 11998)
Solids volume approx. 50%
Density 1,48 g/cm3(base AP) and 1,2 g/cm3 (base C)
Storage Protect from frost. Store in tightly closed cans, in dry premises. Storing temperature should be below 5°C - 25°C.

APPLICATION DETAILS
Application conditions All surfaces to be painted must be dry, the temperature of the air at least +5°C, and the relative humidity of the air below 80%.
Painting Stir paint thoroughly before use. Apply 2-3 coats by brush, roller or by spray.
Cleaning of tools Tools should be cleaned with water immediately after use.
EU VOC 2004/42/EC-limit value Cat. A/a. Acceptable content VOC since 2007r. - 75 g/l. Product contain below: 75 g/l VOC.

HEALTH AND SAFETY CLASSIFICATION Product not classified as a dangerous by Act from 11th of January 2001 about chemical substances and chemical agents (Dz.U. z 2001 r. Nr. 11 poz. 84) also with later changes. Material Safety Data Sheet available upon request. Material Safety Data Sheet - Optiva KOLOR
ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL Empty cans and liquid waste should be recycled or disposed of in accordance with local regulations.
TRANSPORT -
-

The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.

Back