Full-matt acrylate-based translucent effect paint. For use in interior rooms on surfaces which have been previously painted with Feelings Interior Paint. Not suitable for painting doors or furniture.

Coverage:	13-18 m2/l.
Application method:	Brush or roller application. Finishing with effect roller.
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet Material Safety Data Sheet - Feelings Effect Paint

Blackboards. Chalk writing attaches well to the painted surface and can be wiped away easily.

Coverage:	9-12 m2/l.
Application method:	Brush or spray application.
Thinner:	Water
Product data sheet Material Safety Data Sheet - Blackboard Paint

Suitable for use in dry interior surfaces.
Magnetic can be finished 1-2 times with Tikkurila's waterborne interior wall paint, if another colour is preferred on the surface than grey. Thick  topcoat layers reduce the adhesion of magnets.

Coverage:	0,5 l /  1,5 m2
Application method:	Roller or brush
Product data sheet Material Safety Data Sheet - Magnetic

For prime zinc-coated steel sheets, previously alkyd-painted surfaces and polyester surfaces with Rostex Super Metal Primer.

Coverage:	10-13 m2/l
Application method:	Brush, conventional spraying or roller (short pile mohair roller)
Thinner:	Spray Thinner 1032
Product data sheet Material Safety Data Sheet - Miranol Decoration Paint

Optiva Formo can be applied on cement plasters and lime-cement plaster, dry plasters and concrete surfaces.

Coverage:	2 – 2,5kg/ m2  (the package is enough to get approx. 5 -7 m2 of ready surface).
Application method:	Stainless steel or plastic float.
Thinner:	Water
Colour Cards:	Interior Colour Card
Product data sheet Material Safety Data Sheet - Optiva FORMO

Apply onto a coat of Tikkurila acrylate wall paint such as Harmony/Feelings Interior Paint. Because Taika Pearl Glaze is transparent, the colour of the primer (e.g. Harmony) will have a critical effect on the final look. Good lighting accentuates the fancy effect. Find recommendations for colour choices from Taika colour card.

Coverage:	n. 8 m-12 2/l.
Application method:	Brush, effect roller, spray. For application use a short-pile roller. Use brush or effect roller to create different surface patterns. Conventional spray: fluid nozzle 1.8mm, thinning up to 40 % with water.
Thinner:	Water
Colour Cards:	Taika Pattern and Colour Guide
Product data sheet Material Safety Data Sheet - TAIKA Pearl Glaze

For interior painting on wooden, wood fibre board, particle board and metallic surfaces and plasterboard (gypsum board), concrete and similar surfaces.

Coverage:	6-8 m2/l.
Application method:	Brush, effect roller, spray. For application use a short-pile roller. Use brush or effect roller to create different surface patterns. Conventional spray: fluid nozzle 1.8mm, thinning up to 40 % with water. Thinner: if necessary thin with water
Thinner:	Water
Colour Cards:	Taika Pattern and Colour Guide
Product data sheet Material Safety Data Sheet - TAIKA Pearl Paint

Apply on top of a Tikkurila acrylate wall paint such as Harmony Interior Paint. Because Taika Pearl Glaze is transparent, the colour of the primer (e.g. Harmony) will have a critical effect on the final look. Good lighting accentuates the fancy effect.

Coverage:	9 -12 m2/l.
Application method:	Brush, effect roller, spray. Conventional spray: fluid nozzle 1.8mm, thinning up to 40 % with water.
Thinner:	Water
Product data sheet Material Safety Data Sheet - TAIKA 2-Coloured Pearl Glaze

Suitable for new or previously painted concrete, screeded surface, brick, wooden fibreboard, gypsum board or chipboard wall surfaces when a textured coating is desired. TUNTO Fine can also be applied on ceilings.

Coverage:	1-9m2/l depending on the painting method as follows: - thick rolling 1-1,5m2/l - thin rolling 4-5 m2/l - brushing 2-2,5m2/l - thick spatula 2-2,5m2/l - thin spatula 7-9m2/l
Application method:	Apply with roller and for patterning use e.g. a wide brush, wallpaper knife, firm brush or patterning roller. Thinning: With water
Thinner:	Water
Colour Cards:	Tunto, Colour card for textured finishes
Product data sheet Material Safety Data Sheet - TUNTO Fine

Suitable for new or previously painted concrete, screeded surface, brick, wooden fibreboard, gypsum board or chipboard wall surfaces. TUNTO Coarse can also be applied on ceilings.

Coverage:	0,5 – 0,7 m²/l. Coverage is determined by the roughness and porosity of the surface, the painting method and painting conditions.
Application method:	Steel trowel; for spray application use plaster pump or hopper gun, min. nozzle size 5 mm. Finish with Tikkurila plastic float. Before spray application, remove the small metal plate which may have dropped into the paint can during tinting.
Thinner:	Water
Colour Cards:	Tunto, Colour card for textured finishes
Product data sheet Material Safety Data Sheet - TUNTO Coarse