 |
PRODUCT DATA SHEET 20.05.2008 |
|
Magnetic |
|
|
| DESCRIPTION | Waterborne special paint for interior use. | |
| PRODUCT FEATURES | Suitable for use in dry interior surfaces. Magnetic can be finished 1-2 times with Tikkurila's waterborne interior wall paint, if another colour is preferred on the surface than grey. Thick topcoat layers reduce the adhesion of magnets. |
|
| RECOMMENDED USES | Concrete, plasterboard, chipboard and filler-treated surfaces. | |
| TECHNICAL DATA | ||
 2  3 |
||
| Colour Range | Grey | |
| Gloss grade | Matt | |
| Coverage | 0,5 l / 1,5 m2 | |
| Can sizes | 0,5 l | |
| Mixing ratio | Not to be thinned | |
| Application method | Roller or brush | |
| Drying time at 23°C and 50% relative air humidity | 24 hours | |
| Density | Approx. 2.60 kg/l, ISO 2811 | |
| Storage | Protect from frost | |
| Product code | 001_5800 | |
| APPLICATION DETAILS | ||
| Application conditions | The surface to be painted must be dry and the temperature at least +10 °C. The temperature of the air must be at least +5 °C and the relative humidity of the air below 80 %. | |
| Preparation | Unpainted surfaces:
Clean dust, dirt and loose material from the surface. Level the holes and cracks with a suitable Presto filler, if necessary. Prime unpainted surfaces with e.g. Luja Universal Primer. Previously painted surfaces: Wash down previously painted surfaces with diluted Cleaning Agent (Maalipesu) and rinse carefully with water. Grind glossy surfaces matt with sandpaper to assure best possible adhesion. Remove sand dust. |
|
| Painting | Stir Magnetic well before use and now and then during the use. Paint 3 times using plenty of Magnetic paint and short-fluffed roller or brush.
Let dry 24 hours between the coats. Use 0,5 litres of paint for approx. 1,5 m² in three coats. Finishing can be done after one day if needed. |
|
| Cleaning of tools | Remove excess paint and clean the tools with water. Washbowl has to be washed carefully, because the iron that the paint contains can dye. | |
| Maintenance instructions | Earliest after 1 month from painting.
Clean the surfaces rather as dry cleaning using aspirator, smooth brush or duster. Using damp cleaning cloth can leave a trace on the surface. After the finishing the surface should be treated carefully for a couple of weeks, because the paint attains its final hardness and durability in normal conditions after approx. 1 month. If the surfaces have to be cleaned soon after the finishing, clean the surface rather as dry cleaning using aspirator, smooth brush or duster. |
|
| EU VOC 2004/42/EC-limit value | (cat A/i) 140g/l(2010) | |
| HEALTH AND SAFETY CLASSIFICATION | Not classified as hazardous for health. Handle with care and avoid unnecessary exposure. Material Safety Data Sheet is available at request. Material Safety Data Sheet - Magnetic | |
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations for hazardous waste. | |
| TRANSPORT | VAK/ADR - | |
| auvjo200508/ser031204/0015800 | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
