For varnishing interior wooden, wood fibre board and chipboard surfaces

Coverage:	12-14 m2/l.
Application method:	Brush or spray Airless spray: - nozzle 0.009" - 0.013" i.e. 0.230 - 0.330 mm - thinning 0-5 vol-%
Thinner:	White Spirit 1050
Product data sheet Material Safety Data Sheet - Jalo

For use on interior wood surfaces. Kiva Interior Lacquer can also be used for the protective lacquering of stained surfaces. Not suitable for use on floors.

Coverage:	8-14 m2/litre per coat.  Actual spreading rates will depend upon many factors including texture, porosity, moisture content of the substrate and method of application.
Application method:	Brush, sponge or spray.  Polyester or nylon paint brushes are best suited for the application of Kiva Interior Lacquer.
Thinner:	Water
Colour Cards:	Interior Lacquer Colour Card
Product data sheet Material Safety Data Sheet - Kiva Furniture Lacquer

For use on interior wood surfaces. Kiva Interior Lacquer can also be used for the protective lacquering of stained surfaces. Not suitable for use on floors.

Coverage:	8-14 m2/litre per coat.  Actual spreading rates will depend upon many factors including texture, porosity, moisture content of the substrate and method of application.
Application method:	Brush, sponge or spray.  Polyester or nylon paint brushes are best suited for the application of Kiva Interior Lacquer.
Thinner:	Water
Colour Cards:	Interior Lacquer Colour Card
Product data sheet Material Safety Data Sheet - Kiva Furniture Lacquer

For use on interior wood surfaces. Kiva Furniture Lacquer can also be used for the protective lacquering of stained surfaces. Not suitable for use on floors.

Coverage:	8-14 m2/litre per coat.  Actual spreading rates will depend upon many factors including texture, porosity, moisture content of the substrate and method of application.
Application method:	Brush, sponge or spray.  Polyester or nylon paint brushes are best suited for the application of Kiva Interior Lacquer.
Thinner:	Water
Colour Cards:	Interior Lacquer Colour Card
Product data sheet Material Safety Data Sheet - Kiva Furniture Lacquer

Interior wood panelling, walls, ceilings, doors, concrete and brick surfaces. Paneeli-Ässä can also be used for the protective lacquering of stained surfaces. Not suitable for use on floors and furniture.

Coverage:	8-12 m2/litre per coat.  Actual spreading rates will depend upon many factors including texture, porosity, moisture content of the substrate and method of application.
Application method:	Brush or spray.  Polyester and nylon paint brushes are best suited for the application of Paneeli-Ässä.
Thinner:	Water
Colour Cards:	Interior Lacquer Colour Card
Product data sheet Material Safety Data Sheet - Panel Ace

Interior wood panelling, walls, ceilings, doors, concrete and brick surfaces. Paneeli-Ässä can also be used for the protective lacquering of stained surfaces. Not suitable for use on floors and furniture.

Coverage:	8-12 m2/litre per coat.  Actual spreading rates will depend upon many factors including texture, porosity, moisture content of the substrate and method of application.
Application method:	Brush or spray.  Polyester and nylon paint brushes are best suited for the application of Paneeli-Ässä.
Thinner:	Water
Colour Cards:	Interior Lacquer Colour Card
Product data sheet Material Safety Data Sheet - Panel Ace

For interior use on untreated wood, panels and log surfaces. Also suitable for concrete and brick. The product forms a dirt- and water-repellent film.

Coverage:	8 - 12 m2/l
Application method:	Brush or spray
Thinner:	Water
Colour Cards:	Interior Lacquer Colour Card
Product data sheet Material Safety Data Sheet - Panel Ace Log Treatment

Panelled walls and ceilings, logs, doors, etc. with light-coloured wooden surfaces. Dry lacquer surfaces are slightly whitish. Panel-Ace Titan is not suitable for treatment of dark wood surfaces.

Coverage:	8 - 12 m2/l for sawn surfaces
Application method:	Brush and spray
Thinner:	Water
Product data sheet Material Safety Data Sheet - Panel Ace Titan

Unica Super is suitable for application on interior and exterior wooden surfaces. Tinted product gives better protection against sunlight than untinted product.

Coverage:	12 - 14 m2/l per coat. The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
Application method:	Brush or spray. For airless spray use a nozzle 0.009" - 0.013" (0.230 - 0.330 mm). Thinning: if necessary thin up to 10 vol-% with white spirit 1050.
Thinner:	White Spirit 1050
Colour Cards:	Interior Lacquer Colour Card
Product data sheet Material Safety Data Sheet - UNICA SUPER Lacquer gloss and semi-gloss

Unica Super is suitable for application on interior and exterior wooden surfaces.

Coverage:	12 - 14 m2/l per coat. The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
Application method:	Brush or spray. For airless spray, use a nozzle 0.009" - 0.013" (0.230 - 0.330 mm). Thinning: If necessary thin up to 10 vol-% with white spirit 1050.
Thinner:	White Spirit 1050
Colour Cards:	Interior Lacquer Colour Card
Product data sheet Material Safety Data Sheet - UNICA SUPER Lacquer gloss and semi-gloss

Plaster, concrete, brick, chipboard, wallpaper, and wood-fibre boards. Feelings Ceiling Paint can be used for repainting surfaces previously coated with waterborne or alkyd paints.

Coverage:	7-10 m2/l per coat. The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
Application method:	Brush, roller or spray application.  For airless spray application use a 0.018” – 0.023” spray tip and thin by up to 5% with water. Thinning: if necessary thin by up to 5% with water.
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card and Interior Colour Card
Product data sheet Material Safety Data Sheet - Feelings Ceiling Paint

Plaster, concrete, brick, building block and boards, MDF, etc.

Coverage:	5-8 m2/l per coat.   The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
Application method:	Brush, roller or spray application. Thinning: if necessary thin by up to 5% with water.
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet Material Safety Data Sheet - Feelings Extra Durable

Plaster, concrete, brick, building blocks and boards, MDF, wallpaper, etc. Feelings Interior Paint can be used for repainting interior surfaces previously coated with waterborne or alkyd paints. Feelings Interior Paint is also the recommended base coat for Feelings Effect Paint.

Coverage:	10-12 m2/l for non-absorbing surfaces 7-9 m²/l for absorbing surfaces The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
Application method:	Brush, roller or spray application. For airless spray use a 0.017” – 0.021” spray tip. Thinning: if necessary thin by up to 10% with water.
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet Material Safety Data Sheet - Feelings Interior Paint

Suitable for interior painting of plaster, concrete, filler treated, brick, card board, wallpaper and wooden surfaces, also for card-boarded gypsum board, chipboard and wooden fibre board surfaces. Suitable for new and previously painted surfaces, as well as for surfaces previously treated with alkyd paint according to instructions for use. Not suitable for painting doors or furniture.

Coverage:	Absorbent surfaces 7 - 9 m2/l. Non-absorbent surfaces 10 - 12 m2/l.
Application method:	Roller, brush or spray. For airless spray application, use a nozzle 0.017" – 0.021". Thinning: If necessary, thin up to 10% with White Spirit 1050.
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet Material Safety Data Sheet - Harmony

Suitable for interior and exterior lime-rich plaster and previously with lime paint treated surfaces.

Coverage:	0.5 - 0.8 kg/m² (treated 2-3 times). Coverage is determined by roughness and porosity of the surface.
Application method:	Brush (brush application).
Thinner:	Water
Product data sheet Material Safety Data Sheet - Holvi lime paint

Joker is suitable for interior painting of plaster, concrete, filler treated, brick, cardboard, wallpaper and wooden surfaces, also for cardboard-finished gypsum board, chipboard and wood fibre board surfaces. Suitable for new and previously painted surfaces as well as for surfaces previously treated with alkyd paint according to instructions.

Coverage:	10 - 12 m2/l for absorbing surfaces. 7 -9 m2/l for non-absorbing surfaces.
Application method:	Brush, roller or spray. For airless spray application, use a nozzle 0.015” – 0.021”. Thinning: If necessary thin up to 10% with water
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet Material Safety Data Sheet - Joker

Blackboards. Chalk writing attaches well to the painted surface and can be wiped away easily.

Coverage:	9-12 m2/l.
Application method:	Brush or spray application.
Thinner:	Water
Product data sheet Material Safety Data Sheet - Blackboard Paint

For interior painting of concrete, plaster, filler treated, brick and various plate surfaces. Can be used for repainting surfaces previously treated with alkyd paint.

Coverage:	Approx. 5 - 8 m2/l. (When using the Luja method, minimum amount for two coats is 0,32kg/m2 = 7,5 m2/l )
Application method:	Brush, roller or spray. For airless spray application use nozzle 0.015" - 0.021" , Thinning: 0 - 5 vol-%
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet Material Safety Data Sheet - LUJA Finishing Paint

Lumi is suitable for interior painting of plaster, concrete, filler treated, brick, cardboard, wallpaper and wooden surfaces, also for cardboard-finished gypsum board, chipboard and wood fibre board surfaces. Suitable for new and previously painted surfaces as well as for surfaces previously treated with alkyd paints, after preparation according to instructions.

Coverage:	Absorbent surfaces 7 - 9 m2/l. Non-absorbent surfaces 10 - 12 m2/l.
Application method:	Roller or spray. Edges can be painted by brush.
Thinner:	Water
Colour Cards:	Lumi
Product data sheet Material Safety Data Sheet - Lumi

Cement – lime plaster, concrete, carton – gypsum boards, primed wood and metal.  Optiva 5 can also be used for renovation of the surfaces which were previously painted with waterborne and alkyd paints. Paint isn’t recommend to be used on surfaces which were painted with lime milk.

Coverage:	Up to 15 m2/litre per coat. Actual spreading rates will depend upon many factors including texture, porosity and application method.
Application method:	Brush, roller or spray.
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet Material Safety Data Sheet - Optiva 5

For use on interior walls and ceilings for residential areas and offices.

Coverage:	Up to 10 m2/litre per coat.  Actual spreading rates will depend upon many factors including texture, porosity and application method.
Application method:	Brush, roller or spray
Product data sheet Material Safety Data Sheet - Optiva KOLOR

Gypsum board, gypsum, cement-and lime plasters, concrete substrates.

Coverage:	Up to 16 m²/l max. with one coat. The coverage depends on absorbability, substrate texture, application method and colour.
Application method:	Brush, roller or spray
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet Material Safety Data Sheet - Optiva Satin

Gypsum board, gypsum, cement-and lime plasters, concrete substrates.

Coverage:	Up to 16 m²/l max. with one coat. The coverage depends on absorbability, substrate texture, application method and colour.
Application method:	Brush, roller or spray.
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet Material Safety Data Sheet - Optiva20

For painting of cement – lime plaster, concrete, carton – gypsum boards and primed wood and metal.  Optiva Super Mat can also be used for renovation of the surfaces which were previously painted with waterborne and alkyd paints. Paint isn’t recommend to be used on surfaces which were painted with lime milk.

Coverage:	Up to 15 m2/litre per coat.  Actual spreading rates will depend upon many factors including texture, porosity and application method.
Application method:	Brush, roller or spray
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet Material Safety Data Sheet - Optiva Super Mat

For interior painting on wooden, wood fibre board, particle board and metallic surfaces and plasterboard (gypsum board), concrete and similar surfaces.

Coverage:	6-8 m2/l.
Application method:	Brush, effect roller, spray. For application use a short-pile roller. Use brush or effect roller to create different surface patterns. Conventional spray: fluid nozzle 1.8mm, thinning up to 40 % with water. Thinner: if necessary thin with water
Thinner:	Water
Colour Cards:	Taika Pattern and Colour Guide
Product data sheet Material Safety Data Sheet - TAIKA Pearl Paint

Plaster, concrete, brick, building block and boards, MDF, etc.

Coverage:	7-10 m2/l per coat.   The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
Application method:	Brush, roller or spray application.Thinning: if necessary thin by up to 10% with water
Thinner:	Water
Product data sheet Material Safety Data Sheet - Feelings Universal Primer

Gypsum board, gypsum, cement-and lime plasters, concrete substrates.

Coverage:	Up to 8 m2/l max. with one coat. The coverage depends on absorbability, substrate texture, application method and colour.
Application method:	Brush, roller or spray
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet

For priming and undercoating new and previously painted wooden, chipboard and wood fibre board surfaces. Adheres well also to problematic surfaces such as glass, tiles, glass fibre, PVC-plastic, aluminium, zinc coated sheet metal and surfaces coated with alkyd and catalytic paint.

Coverage:	8-10 m2/l.
Application method:	Methods: Brush, roller or spray. For airless spray application use a nozzle 0.011" - 0.015" i.e. 0.280 - 0.380 mm. Thinning:  0 - 10 vol-%
Thinner:	Spray Thinner 1032 and White Spirit 1050
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet Material Safety Data Sheet - OTEX Adhesion Primer

Plaster, concrete, brick, building block and boards, MDF, etc.

Coverage:	7-10 m2/l per coat.   The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
Application method:	Brush, roller or spray application.Thinning: if necessary thin by up to 10% with water
Thinner:	Water
Product data sheet Material Safety Data Sheet - Feelings Universal Primer

Gypsum board, gypsum, cement-and lime plasters, concrete substrates.

Coverage:	Up to 8 m2/l max. with one coat. The coverage depends on absorbability, substrate texture, application method and colour.
Application method:	Brush, roller or spray
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet

For priming and undercoating new and previously painted wooden, chipboard and wood fibre board surfaces. Adheres well also to problematic surfaces such as glass, tiles, glass fibre, PVC-plastic, aluminium, zinc coated sheet metal and surfaces coated with alkyd and catalytic paint.

Coverage:	8-10 m2/l.
Application method:	Methods: Brush, roller or spray. For airless spray application use a nozzle 0.011" - 0.015" i.e. 0.280 - 0.380 mm. Thinning:  0 - 10 vol-%
Thinner:	Spray Thinner 1032 and White Spirit 1050
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet Material Safety Data Sheet - OTEX Adhesion Primer

Full-matt acrylate-based translucent effect paint. For use in interior rooms on surfaces which have been previously painted with Feelings Interior Paint. Not suitable for painting doors or furniture.

Coverage:	13-18 m2/l.
Application method:	Brush or roller application. Finishing with effect roller.
Thinner:	Water
Colour Cards:	Tikkurila Symphony 2436 Colour Card
Product data sheet Material Safety Data Sheet - Feelings Effect Paint

Optiva Formo can be applied on cement plasters and lime-cement plaster, dry plasters and concrete surfaces.

Coverage:	2 – 2,5kg/ m2  (the package is enough to get approx. 5 -7 m2 of ready surface).
Application method:	Stainless steel or plastic float.
Thinner:	Water
Colour Cards:	Interior Colour Card
Product data sheet Material Safety Data Sheet - Optiva FORMO

Apply onto a coat of Tikkurila acrylate wall paint such as Harmony/Feelings Interior Paint. Because Taika Pearl Glaze is transparent, the colour of the primer (e.g. Harmony) will have a critical effect on the final look. Good lighting accentuates the fancy effect. Find recommendations for colour choices from Taika colour card.

Coverage:	n. 8 m-12 2/l.
Application method:	Brush, effect roller, spray. For application use a short-pile roller. Use brush or effect roller to create different surface patterns. Conventional spray: fluid nozzle 1.8mm, thinning up to 40 % with water.
Thinner:	Water
Colour Cards:	Taika Pattern and Colour Guide
Product data sheet Material Safety Data Sheet - TAIKA Pearl Glaze

For interior painting on wooden, wood fibre board, particle board and metallic surfaces and plasterboard (gypsum board), concrete and similar surfaces.

Coverage:	6-8 m2/l.
Application method:	Brush, effect roller, spray. For application use a short-pile roller. Use brush or effect roller to create different surface patterns. Conventional spray: fluid nozzle 1.8mm, thinning up to 40 % with water. Thinner: if necessary thin with water
Thinner:	Water
Colour Cards:	Taika Pattern and Colour Guide
Product data sheet Material Safety Data Sheet - TAIKA Pearl Paint

Apply on top of a Tikkurila acrylate wall paint such as Harmony Interior Paint. Because Taika Pearl Glaze is transparent, the colour of the primer (e.g. Harmony) will have a critical effect on the final look. Good lighting accentuates the fancy effect.

Coverage:	9 -12 m2/l.
Application method:	Brush, effect roller, spray. Conventional spray: fluid nozzle 1.8mm, thinning up to 40 % with water.
Thinner:	Water
Product data sheet Material Safety Data Sheet - TAIKA 2-Coloured Pearl Glaze

Suitable for new or previously painted concrete, screeded surface, brick, wooden fibreboard, gypsum board or chipboard wall surfaces when a textured coating is desired. TUNTO Fine can also be applied on ceilings.

Coverage:	1-9m2/l depending on the painting method as follows: - thick rolling 1-1,5m2/l - thin rolling 4-5 m2/l - brushing 2-2,5m2/l - thick spatula 2-2,5m2/l - thin spatula 7-9m2/l
Application method:	Apply with roller and for patterning use e.g. a wide brush, wallpaper knife, firm brush or patterning roller. Thinning: With water
Thinner:	Water
Colour Cards:	Tunto, Colour card for textured finishes
Product data sheet Material Safety Data Sheet - TUNTO Fine

Suitable for new or previously painted concrete, screeded surface, brick, wooden fibreboard, gypsum board or chipboard wall surfaces. TUNTO Coarse can also be applied on ceilings.

Coverage:	0,5 – 0,7 m²/l. Coverage is determined by the roughness and porosity of the surface, the painting method and painting conditions.
Application method:	Steel trowel; for spray application use plaster pump or hopper gun, min. nozzle size 5 mm. Finish with Tikkurila plastic float. Before spray application, remove the small metal plate which may have dropped into the paint can during tinting.
Thinner:	Water
Colour Cards:	Tunto, Colour card for textured finishes
Product data sheet Material Safety Data Sheet - TUNTO Coarse