 |
PRODUCT DATA SHEET 22.11.2006 |
|
Feelings Interior Paint |
||
| DESCRIPTION | Waterborne acrylate paint | |
| PRODUCT FEATURES | Plaster, concrete, brick, building blocks and boards, MDF, wallpaper, etc. Feelings Interior Paint can be used for repainting interior surfaces previously coated with waterborne or alkyd paints. Feelings Interior Paint is also the recommended base coat for Feelings Effect Paint. | |
| RECOMMENDED USES | For use on interior walls and ceilings. Offers good wash-resistance. | |
| TECHNICAL DATA | ||
 7  12 |
||
| Base paints | A and C | |
| Colour Range | Available in white and the complete Tikkurila Symphony Colour Collection. | |
| Gloss grade | Full-matt | |
| Building material emission class | M1 | |
| Coverage | 10-12 m2/l for non-absorbing surfaces 7-9 m²/l for absorbing surfaces The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method. |
|
| Can sizes | gross 1 l, net contents 0,9 l,
gross 3 l, net contents 2,7 l gross 10 l, net contenst 9 l |
|
| Thinner | Water | |
| Application method | Brush, roller or spray application. For airless spray use a 0.017” – 0.021” spray tip. Thinning: if necessary thin by up to 10% with water. |
|
| Drying time at 23°C and 50% relative air humidity | Normally touch-dry in ½ hour and recoatable after 1-2 hours. | |
| Wash resistance | >5 000 cycles (SFS 3755) | |
| Heat resistance | 85OC (ISO 4211-1, 4211-3) | |
| Solids volume | Approx. 40% | |
| Density | Approx. 1.3 kg/l, ISO 2811 | |
| Storage | Protect from Frost. | |
| Product code | 721_6001/3 | |
| APPLICATION DETAILS | ||
| Application conditions | All surfaces to be painted must be dry, the temperature of the air at least +5OC and the relative humidity of the air below 80%. | |
| Preparation | Surfaces must be clean, dry, and free from grease, dirt, oil, wax, rust, all loose material and surface contamination. Use recommended Tikkurila products as cleaning agents and for mould removal. Use recommended Tikkurila fillers for filling cracks, nail holes, blemishes, etc., and leveling of uneven surfaces. Ensure that existing glossy, gloss painted and filled surfaces are thoroughly flatted down. Ensure that all surfaces are thoroughly prepared. Spot prime all bare areas on previously painted surfaces with Feelings Interior Paint. | |
| Painting | Stir the paint thoroughly and apply two coats of Feelings Interior Paint overall. | |
| Cleaning of tools | Clean with water immediately after use. Tikkurila Pensselipesu (Tool Cleaner) is recommended to be used for cleaning hardened paint from tools. | |
| Maintenance instructions | Earliest 1 month after treatment:
The surfaces can be cleaned with a dry brush, mop or cloth. Dirty surfaces can be cleaned with a neutral (pH 6-8) detergent using a damp cleaning equipment. The surface must no be left wet after cleaning. Follow the instructions of the manufacturer for the detergent solution. The product will achieve its final hardness and durability under normal conditions after 1 month, therefore the surfaces must be handled with care during this time. If the surfaces must be cleaned soon after treatment, use a dry or damp cloth or mop. |
|
| Maintenance treatment | Surfaces treated with Feelings Interior Paint can be maintained with Feelings Interior Paint or a similar water-borne paint. | |
| EU VOC 2004/42/EC-limit value | (cat A/a) 75g/l(2007)/ 30g/l(2010) | |
| HEALTH AND SAFETY CLASSIFICATION | Not classified as hazardous to health. Handle with care, avoid prolonged contact with skin and breathing of spray mist. A Material Safety Data Sheet is available on request.Material Safety Data Sheet - Feelings Interior Paint | |
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations. | |
| TRANSPORT | VAK/ADR - | |
| mli091106/ /lko141106/ ktu221106809- 721- | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
