 |
PRODUCT DATA SHEET 01.01.1970 |
|
Koulutaulumaali (Blacboard Paint) |
|
|
| DESCRIPTION | Waterborne acrylate paint for blackboard painting. | |
| PRODUCT FEATURES | Blackboards. Chalk writing attaches well to the painted surface and can be wiped away easily. | |
| RECOMMENDED USES | Blackboards. | |
| TECHNICAL DATA | ||
 9  12 |
||
| Colour Range | Sea green (no. 555) and black (no. 202) | |
| Gloss grade | Matt | |
| Coverage | 9-12 m2/l. | |
| Can sizes | 1 l. | |
| Thinner | Water | |
| Application method | Brush or spray application. | |
| Drying time at 23°C and 50% relative air humidity |
Approx. 24 hours. |
|
| Chemical resistance | Good. | |
| Solids volume | Approx. 35% | |
| Density | Approx. 1.0 kg/l, ISO 2811 | |
| Storage | Protect from frost. | |
| Product code | 361 | |
| APPLICATION DETAILS | ||
| Application conditions | All surfaces to be painted must be dry, the temperature of the air at least +15OC and the relative humidity of the air below 80%. | |
| Preparation | Untreated surface
Clean all dirt and dust from unpainted plywood surfaces. Prime with Otex Adhesive Primer. Previously painted surface Wash down surfaces with Maalipesu Cleaning Detergent and rinse carefully with water. Allow to dry. Sand and remove the sanding dust. Prime with Otex Adhesive Primer. If the surface has been previously painted with waterborne Blackboard Paint, the maintenance painting can be done directly on top of the old paint without sanding and priming. |
|
| Painting | Stir the structuring agent on top of the Blackboard Paint carefully into the paint before use and thin the paint if necessary. Apply 1-2 coats with brush or spray. | |
| Cleaning of tools | Clean tools with water. Tikkurila Pensselipesu (Tool Cleaner) is recommended to be used for cleaning hardened paint from tools. | |
| Maintenance instructions | Earliest after 1 month from painting: Clean the surface with neutral cleaning agent
(pH 6-8) and smooth brush, sponge or cleaning cloth. Clean very dirty surfaces with slightly alkalic cleaning agent (pH 8-10) and cleaning cloth, mop or sponge. Rinse carefully with water. The surface achieves its final hardness and durability after one month under normal conditions, therefore the surfaces must be handled with care during this time. If the surface has to be cleaned soon after treatment, use smooth brush, damp cleaning cloth or mop. |
|
| EU VOC 2004/42/EC-limit value | (cat A/d) 130g/l(2010) | |
| HEALTH AND SAFETY CLASSIFICATION | Not classified as hazardous for health. Handle with care. Avoid prolonged contact with skin and breathing of spray mist. A Material Safety Data Sheet is available on request.Material Safety Data Sheet - Blackboard Paint | |
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations for hazardous waste. | |
| TRANSPORT | VAK/ADR - | |
| mli141106/jjh211106/ktu221106/361- | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
