PRODUCT DATA SHEET
(Previous date 27.03.2012)'
|DESCRIPTION||Acrylate water-borne primer.|
For interior painting of wooden, chipboard, wood fibre board and metal surfaces. Also suitable for repainting surfaces previously coated with an alkyd or acid catalyzed paint.Not suitable for repainting surfaces previously treated with nitrocellulose varnish.
|RECOMMENDED USES||Suitable for doors, cabinets, furniture, window frames, skirtings, radiators, sheet metal wood stoves, etc.|
|Colour Range||Tikkurila Symphony 2436 colour card.|
|Building material emission class||M1|
|Coverage||6-8 m2/l per coat.
The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
|Can sizes||0,9 l, 2,7 l|
Spray, roller or brush.
-nozzle 0.013"-0.015"-thinning 0-5 vol-%
|Drying time at 23°C and 50% relative air humidity||
Touch dry after approx. 1 hour.
Recoatable with Helmi primer approximately after 2 hours.
Recoatable with Helmi Furniture Paint approximately after 5 hours.
|Solids volume||Approx. 35%|
|Density||Approx. 1.3 kg/l|
|Storage||Protect from frost.|
|Application conditions||The surface to be painted must be dry, the temperature of the air at least +8 oC, and the relative humidity of the air below 80%.
Lower temperature (approx. +15 ºC) and higher humidity (50-70 % RH) will make the open-time of the paint longer and the work easier.
|Preparation||Remove all dirt and dust carefully to obtain good adhesion. Treat the knots with Oksalakka (Knotting Lacquer).
Wash down previously painted or lacquered surfaces with Maalipesu Cleaning Agent and rinse carefully with water. Let dry. Remove loose, flaking paint or lacquer with a scraper and sand the whole surface. Remove sanding dust. Fill holes and cracks with Presto Rapid Filler and sand the filled parts. Remove sanding dust.
|Priming||Stir Helmi Primer well before use and thin with water, if necessary. Apply by brush, roller, paint pad, or spray.
Apply on large surfaces with e.g. a furniture paint roller and then level with a brush.
Multi-branched synthetic brushes are best suited for the work.
Prime absorbent surfaces first with primer thinned with 5-10 % water, and sand. After 2 hours paint the surface with unthinned primer.
Finishing can be done after 5 hours with Helmi Furniture Paint.
|Cleaning of tools||Remove excess paint from tools before cleaning with water. Tikkurila Pensselipesu (Tool Cleaner) is recommended for removal of slightly hardened paint.|
|Maintenance instructions||If needed, at the earliest after approx. 1 month from painting: Clean the surface with a neutral (pH 6-8) diswashing liquid and with soft brush, sponge or cleaning cloth. Clean very dirty surfaces with a lightly alkaline (pH 8-10) diswashing liquid and with cleaning cloth or sponge. Rinse the surface carefully.
The surfaces must be handled with care during few weeks after finishing, because the paint will reach its final hardness in normal circumstances after one month. If the surfaces need to be cleansed soon after finishing they must be cleansed lightly with a soft brush or slightly moist cleaning cloth.
|EU VOC 2004/42/EC-limit value||(cat A/g) 30g/l(2010) Helmi Furniture Primer contains VOC max. 30g/l.|
HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
|The product is not classified as dangerous. A Safety Data Sheet is available on request. Safety data sheet|
|ENVIRONMENTAL and WASTE DISPOSAL||Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.|
|TRANSPORT||VAK/ADR: not classified|
|sr190315 / ssa270208 / ars260308 / tpi250308 / mli091006 / hok111006 / 364-s|