 |
PRODUCT DATA SHEET 28.02.2008 |
|
Jehu - Alkyd Primer |
|
|
| DESCRIPTION | Alkyd primer for interior painting. | |
| PRODUCT FEATURES | Suitable for priming and undercoating of wood, wood fibre board and card board surfaces as well as for metal surfaces primed with anti-corrosive primer. | |
| RECOMMENDED USES | Doors, windows and furniture. | |
| TECHNICAL DATA | ||
 10  15 |
||
| Base paints | AP | |
| Colour Range | Can be tinted with all colours from Tikkurila Symphony colour card. Use only half of the colorant amount of the Symphony shade formula. The shade accuracy is not perfect.
AP paint can be used white and tinted. |
|
| Gloss grade | Matt | |
| Coverage | Approx. 10-15 m2/l, depending on the absorbency of the surface as well as on the spreading technique. |
|
| Can sizes | White 1/3 l
Base Paint AP 0,9 l, 2,7 l, 9 l |
|
| Thinner | White Spirit 1050 and Spray Thinner 1032 | |
| Application method | Brush, Spray or roller. For airless spray application, use a nozzle of 0.013"-0.018" For high pressure spray application, use a nozzle of 0.013"-0.018" (0,330 – 0,460). |
|
| Drying time at 23°C and 50% relative air humidity | Dust dry after 1 hour. Ready to sand and recoat after 24 hours. |
|
| Solids volume | Approximately 60 % | |
| Density | Approximately 1.7 kg/l white, ISO 2811 | |
| Storage | Unaffected either by cold storage or transport. Poorly closed or short canisters do not endure long storing. | |
| Product code | 211_6001 | |
| APPLICATION DETAILS | ||
| Application conditions | The surface must be thoroughly dry. The temperature of the air should be at least +5 °C, and the relative humidity of the air below 80%. | |
| Preparation | Unpainted surfaces:
Remove all dirt, grease and dust. Treat knots with Tikkurila Knotting Lacquer. Previously painted surfaces: Wash down previously painted surfaces with Cleaning Agent (Maalipesu) and rinse carefully with water. Cement holes and cracks with Spakkeli Alkyd filler. Sand the filled sports and remove sanding dust. |
|
| Priming | Stir Jehu Wood Primer well and thin with approx. 10% White Spirit 1050 for priming of wooden surfaces. Jehu Wood Primer does not normally need to be thinned for the next coat or for grinding painting. Apply Jehu by brush, roller or spray. | |
| Cleaning of tools | Clean tools with White Spirit 1050 or Tikkurila Tool Cleaner. | |
| Maintenance instructions | Avoid cleansing approx. 1 month after the painting work.
Clean surface with a neutral (pH 6-8) dishwashing agent and a soft brush, sponge or a dust rag. Soiled surfaces can be cleansed with a cleaning tool using a neutral (pH 6-8) detergent. Rinse surface carefully after maintenance. Handle the surface with care, ultimate durability and hardness is reached in approx. a moth under normal circumstances. If cleansing is needed, use a soft brush, a mop or a damp cleaning cloth. |
|
| EU VOC 2004/42/EC-limit value | (cat A/g) 450g/l(2007)/350g/l(2010)
Jehu contains VOC max. 450g/l. |
|
| HEALTH AND SAFETY CLASSIFICATION | Contains: Naphtha, hydrotreated heavy FLAMMABLE. Use only in well-ventilated areas. Do not breathe vapour/spray. If swallowed, seek medical advice immediately and show this container or label. Keep out of the reach of children. Contains methylethylketoxime. May produce an allergic reaction. A Material Safety Data Sheet is available on request.Material Safety Data Sheet - Jehu AP Base PaintMaterial Safety Data Sheet - Jehu CP Base Paint | |
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations. | |
| TRANSPORT | VAK/ADR 3 III | |
| ssa270208/ars250308/tpi250308/ 200020- | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
