 |
PRODUCT DATA SHEET 01.01.1970 |
|
Termal Silikonimaali (Silicone Paint), black |
|
|
| DESCRIPTION | A pine-resin based silicone paint. | |
| PRODUCT FEATURES | For exterior and interior metal surfaces. Resistant up to + 400 °C dry heat. | |
| RECOMMENDED USES | Suitable for metal objects. | |
| TECHNICAL DATA | ||
 16  20 |
||
| Colour Range | Black | |
| Gloss grade | Semi-matt | |
| Coverage | 16-20 m2/l. | |
| Can sizes | 1/10 l, 1/3 l. | |
| Thinner | 1031 | |
| Application method | Brush or spray | |
| Drying time at 23°C and 50% relative air humidity | Dust dry in 10 minutes. Touch dry after approx. 30 minutes under normal conditions. Reaches its final hardness after 1 hour at 230 ºC. | |
| Heat resistance | Withstands temperatures up to + 400 °C. | |
| Solids volume | Approx. 20 %. | |
| Density | 1.0 kg/l, ISO 2811 | |
| Storage | Unaffected either by cold storage or transportation. | |
| APPLICATION DETAILS | ||
| Application conditions | All surfaces must be dry. The temperature of the air should not fall below +5 °C and the relative humidity of the air should not exceed 80 %. | |
| Preparation | Untreated metal surfaces:
Remove dirt and dust from untreated metal surfaces. Remove oil and grease with White Spirit 1050 or Maalipesu cleaning agent and rinse carefully with water. Dry the surface immediately. Previously painted surfaces: Remove old peeling paint with a scraper or steel brush. |
|
| Painting | Stir Termal black well before use and occasionally during painting. Apply a thin layer (15 µm, dry film thickness) by brush or spray. One treatment is usually enough. Note! The final hardness of the product is achieved after heating for 1 hour at 230 ºC. | |
| Cleaning of tools | Clean tools with Thinner 1031 or with Tikkurila Pensselipesu.
|
|
| HEALTH AND SAFETY CLASSIFICATION | Harmful, Xn Contains: Xylene, n-butanol FLAMMABLE. HARMFUL BY INHALATION AND IN CONTACT WITH SKIN. IRRITATING TO SKIN. RISK OF SERIOUS DAMAGE TO EYES. Do not breathe vapour/spray. Use only in well ventilated areas. Wear suitable protective clothing, gloves and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show this container or label. Keep out of the reach of children. A Material Safety Data Sheet is available on request.Material Safety Data Sheet - TERMAL black | |
 Harmful |
||
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations. | |
| TRANSPORT | VAK/ADR 3 III | |
| mli121006/lko171006/tho150906/0067689 | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
