Thermally modified interior wood surfaces

Parquet and board floors and other interior wooden surfaces which are subject to heavy mechanical and chemical stress.

Make sure Parquet-Ace Floor Lacquer is suitable for the wooden surface to be treated by testing it on a small area before treating the whole surface.

NB: Parquet-Ace lacquer is not suitable for diamond pine, smoked oak or stabilized brown beech surfaces.

Coverage:	Brush application  7 - 10 m2/l. Roller application 8 - 10 m2/l. Felt trowel application 10 - 12 m2/l. Steel trowel application 20 - 25 m2/l.
Application method:	Semi-matt and semi-gloss: Brush, spatula or short-napped roller Gloss: Brush or spatula Thinning: If necessary thin with water
Thinner:	Water
Product data sheet Material Safety Data Sheet - Parquet Ace Floor Lacquer gloss, semi-gloss and semi-matt

Forms a dirt- and water-repellent surface. Containts anti-mould agents, which protect the surface. Suitable for treatment of wood surfaces according to instructions.

Coverage:	8-12 m2/l depending on wood species.
Application method:	Brush
Thinner:	Water
Colour Cards:	Arctic
Product data sheet Material Safety Data Sheet - Supi Arctic EP

Supi Sauna Wax is absorbed into the wood and it forms a humid and dirt resistant surface.

Coverage:	10-13 m2/l depending on wood species.
Application method:	Foam brush, sponge or brush with artificial bristles.
Thinner:	Water
Colour Cards:	Lapponia and Interior Lacquer Colour Card
Product data sheet Material Safety Data Sheet - SUPI Saunavaha (Sauna Wax) [GB-ENG]

Suitable for use on wood, wood fibre board and concrete surfaces according to instructions for use.

Coverage:	8-12 m2/l.
Application method:	Brush or spray.
Thinner:	Water
Colour Cards:	Interior Lacquer Colour Card
Product data sheet Material Safety Data Sheet - Supi Sauna Finish

Unica Super is suitable for application on interior and exterior wooden surfaces. Tinted product gives better protection against sunlight than untinted product.

Coverage:	12 - 14 m2/l per coat. The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
Application method:	Brush or spray. For airless spray use a nozzle 0.009" - 0.013" (0.230 - 0.330 mm). Thinning: if necessary thin up to 10 vol-% with white spirit 1050.
Thinner:	White Spirit 1050
Colour Cards:	Interior Lacquer Colour Card
Product data sheet Material Safety Data Sheet - UNICA SUPER Lacquer gloss and semi-gloss

Unica Super is suitable for application on interior and exterior wooden surfaces.

Coverage:	12 - 14 m2/l per coat. The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
Application method:	Brush or spray. For airless spray, use a nozzle 0.009" - 0.013" (0.230 - 0.330 mm). Thinning: If necessary thin up to 10 vol-% with white spirit 1050.
Thinner:	White Spirit 1050
Colour Cards:	Interior Lacquer Colour Card
Product data sheet Material Safety Data Sheet - UNICA SUPER Lacquer gloss and semi-gloss