Tikkurila uses cookies to ensure the best possible user experience. If you continue on our site, you will approve the use of cookies. Read more.
Tikkurila worldwide
PRODUCT DATA SHEET
13.07.2016
(Previous date 04.09.2015)'

Parketti-Ässä 20, 50 and 80 Floor Lacquer

Parketti_Assa_50_1L[1]
DESCRIPTION Water-borne polyurethane-acrylate lacquer for interior use.
PRODUCT FEATURES

Suitable for priming, finishing and maintenance lacquering in interior surfaces. Also suitable for maintenance painting of previously painted wooden floors. Before application make sure Parketti-Ässä Floor Lacquer is suitable for the wooden surface to be treated by testing it on a small area.

 

 

RECOMMENDED USES Parquet and board floors and other interior sanded wooden surfaces which are subject to mild mechanical and chemical stress.

TECHNICAL DATA
  The paint is suitable for interior floors The paint is water-borne Tool: roller Tool: brush Työväline: teräslasta
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Features Available: Semi-matt, semi-gloss and gloss
Building material emission class M1
Coverage

Brush application  7 - 10 m2/l.

Roller application 8 - 10 m2/l. (note! not gloss lacquer)

Felt trowel application 10 - 12 m2/l.

Steel trowel application 20 - 25 m2/l.

Can sizes 1 l, 5 l and 10 l
Thinner Water
Application method

Semi-matt and semi-gloss: Brush, spatula or short-napped roller

Gloss: Brush or spatula

Thinning: If necessary thin with water



Drying time at 23°C and 50% relative air humidity

Drying times between applied coats are informed in directions for use. Ready to use after approx.  12 hours from previous coat. Avoid intense stress during the first two weeks. Avoid laying heavy articles and things which prevent drying - such as carpets – on the floor during the first week.

Wash resistance Good with all ordinary cleaning detergents, SFS 3755
Chemical resistance Resists wiping with e.g. White Spirit, does not resist Thinner.
Solids volume Approx. 30 %.
Density 1.0 kg/l, ISO 2811
Storage Protect from frost.
Product code 005_3911, 3912

APPLICATION DETAILS
Application conditions The wooden surface has to be dry and free from dirt, wax and grease.
The temperature of the air and surface should be at least +15ºC, and the relative humidity of the air 30 - 80 %.
Preparation Sand the floors in direction of wood texture or light from window (sanding paper n:o 100 or 120). Remove sanding dust carefully with vacuum cleaner.
Priming Priming of sanded bare wooden floors:

Shake Parketti-Ässä Floor Lacquer thoroughly before starting and occasionally during application. Pour the lacquer on the floor and spread with a stainless steel trowel tightly in direction of the wood grains and texture. Allow to dry approx. 1 hour and if needed, sand matt (sanding paper n:o 150). Remove sanding dust carefully with a vacuum cleaner. Apply 1-2 steel trowel strokes with the Floor Lacquer. Allow the surface to dry 30-60 minutes between each layer.
Diluting Thinning: If necessary thin with water
Lacquering Finishing lacquering of primed or stained floors:

Shake Parketti-Ässä Floor Lacquer thoroughly before starting and occasionally during application. Apply Parketti-Ässä Floor Lacquer 2-3 times using a flotex or mohair spatula or 1-2 times with a roller.(Note! No roller application for gloss lacquer).
Cleaning of tools Clean tools with water. Tikkurila Pensselipesu (Tool Cleaner) is recommended when cleaning hardened lacquer from the brush.
Maintenance instructions Maintenance lacquering: Industrially treated or previously lacquered/painted parquet and wooden floors:

Shake Parketti-Ässä Floor Lacquer thoroughly before starting and occasionally during application. Clean the slightly worn wooden floor from dirt, wax and grease. Sand down surfaces in poor condition to bare wood and apply lacquer like instructed above. Sand the surface matt with a grinding machine (sanding paper n:o 120 or 150). Remove sanding dust carefully with a vacuum cleaner and wipe the surface with a damp, lint-free and clean cloth. Before lacquering, check the suitability of Parketti-Ässä on previously treated floors by lacquering a small test area. Apply Parketti-Ässä Floor Lacquer 2-3 times using a flotex or mohair spatula or 1-2 times with a roller. (Note! No roller application for gloss lacquer).

Uneven wooden floors:
Shake Parketti-Ässä Floor Lacquer thoroughly before starting and occasionally during application. Uneven wooden floors are lacquered using a brush. First apply a thin layer and allow to dry at least 1 hour. Continue few boards at a time according to wood grains.
Spread the lacquer evenly, avoid rubbing circular movements. Sand the surface and remove sanding dust carefully. Apply the second layer and allow to dry approx. 3 hours before applying the third layer. The third layer should be thick.
EU VOC 2004/42/EC-limit value (cat A/i) 140g/l(2010) Parketti-Ässä Finishing Lacquer contains VOC max. 140g/l.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available on request.Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT VAK/ADR -
ser310816 / garta181214 / niear020810 / mkv151214 / 005 3911