Tikkurila worldwide
Tikkurila PRODUCT DATA SHEET
15.11.2006

Supi Laudesuoja (Sauna Bench Protection)

DESCRIPTION Oil protection for wood surfaces against moisture and dirt.
PRODUCT FEATURES
RECOMMENDED USES Sauna benches and other clean untreated wooden surfaces.

TECHNICAL DATA
  Tool: brush
The coverage of the paint on rough surfaces
8
The coverage of the paint on smooth surfaces
15
Colour Range Colourless, deepens the colour of the wood.
Gloss grade undefined
Coverage 8 - 15 m2/l depending on porosity of the surface.
Can sizes 250 ml, 1 l
Application method Brush or clean cloth.
Drying time at 23°C and 50% relative air humidity The oil is absorbed into the wood. Speed of absorption depends on the porosity of the wood. Excess oil should be wiped off with a clean cloth.
Solids volume 100 %.
Density 0.8 kg/l, ISO 2811.
Storage Protect from frost.
Product code 005_9100

APPLICATION DETAILS
Application conditions The surface must be dry, the temperature of the air over +5 ºC, and the relative humidity of the air below 80 %.
Preparation Wash down the surfaces and allow them to dry. Very dirty or darkened surfaces can be sanded before the treatment.
Treatment Apply SUPI Sauna Bench Protection by brush or with a clean cloth and allow the oil to absorb into the wood. For very porous wood material, repeat the treatment. Wipe off the extra oil with a clean cloth. Warm up the sauna and wipe away remaining oil.
Cleaning of tools Clean tools with water or with Tikkurila Pensselipesu (Tool Cleaner).
EU VOC 2004/42/EC-limit value (cat A/f) 130g/l(2010)

HEALTH AND SAFETY CLASSIFICATION The product is not classified as dangerous. A Material Safety Data Sheet is available on request.Material Safety Data Sheet - SUPI Sauna Bench Protection
ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT VAK/ADR -
mli011106/lko141106/tho031106/0059100

The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.

Back