Parquet and board floors and other interior wooden surfaces which are subject to heavy mechanical and chemical stress.

Make sure Parquet-Ace Floor Lacquer is suitable for the wooden surface to be treated by testing it on a small area before treating the whole surface.

NB: Parquet-Ace lacquer is not suitable for diamond pine, smoked oak or stabilized brown beech surfaces.

Coverage:	Brush application  7 - 10 m2/l. Roller application 8 - 10 m2/l. Felt trowel application 10 - 12 m2/l. Steel trowel application 20 - 25 m2/l.
Application method:	Semi-matt and semi-gloss: Brush, spatula or short-napped roller Gloss: Brush or spatula Thinning: If necessary thin with water
Thinner:	Water
Product data sheet Material Safety Data Sheet - Parquet Ace Floor Lacquer gloss, semi-gloss and semi-matt

Unica Super is suitable for application on interior and exterior wooden surfaces. Tinted product gives better protection against sunlight than untinted product.

Coverage:	12 - 14 m2/l per coat. The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
Application method:	Brush or spray. For airless spray use a nozzle 0.009" - 0.013" (0.230 - 0.330 mm). Thinning: if necessary thin up to 10 vol-% with white spirit 1050.
Thinner:	White Spirit 1050
Colour Cards:	Interior Lacquer Colour Card
Product data sheet Material Safety Data Sheet - UNICA SUPER Lacquer gloss and semi-gloss

Unica Super is suitable for application on interior and exterior wooden surfaces.

Coverage:	12 - 14 m2/l per coat. The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
Application method:	Brush or spray. For airless spray, use a nozzle 0.009" - 0.013" (0.230 - 0.330 mm). Thinning: If necessary thin up to 10 vol-% with white spirit 1050.
Thinner:	White Spirit 1050
Colour Cards:	Interior Lacquer Colour Card
Product data sheet Material Safety Data Sheet - UNICA SUPER Lacquer gloss and semi-gloss

Interior concrete and wooden floors. Also suitable for repainting floors previously painted with alkyd or epoxy paints, or treated with epoxy varnish.

Coverage:	Concrete floors 7-9 m2/l. Metal and wooden surfaces 9-11 m2/l.
Application method:	Brush, roller or spray.
Thinner:	White Spirit 1050
Colour Cards:	Floor Paints Colour Card
Product data sheet Material Safety Data Sheet - Betolux Floor Paint

Concrete and wooden floors and stairs in dry residential. Suitable also for renovation of floor surfaces previously painted with alkyd or epoxy paint, or treated with epoxy varnish.

Coverage:	5-7 m2/l.
Application method:	Brush or roller.
Thinner:	Water
Colour Cards:	Floor Paints Colour Card
Product data sheet Material Safety Data Sheet - Betolux Akva