 |
PRODUCT DATA SHEET 13.01.2006 |
|
Joker |
|
|
| DESCRIPTION | Solvent free co-polymer emulsion that resists cleaning and dries to a superfine matt finish with a slight sheen. | |
| PRODUCT FEATURES | Joker is suitable for interior painting of plaster, concrete, filler treated, brick, cardboard, wallpaper and wooden surfaces, also for cardboard-finished gypsum board, chipboard and wood fibre board surfaces. Suitable for new and previously painted surfaces as well as for surfaces previously treated with alkyd paint according to instructions. | |
| RECOMMENDED USES | For painting ceilings and walls in living rooms, bedrooms and children’s rooms, as well as halls and kitchens and other similar dry premises. Joker resists cleaning. | |
| TECHNICAL DATA | ||
 7  12 |
||
| Base paints | A and C | |
| Colour Range | Tintable in shades of the Tikkurila Symphony colour card. Small amounts of auxiliary solvents are added to the tinted products. | |
| Gloss grade | Matt | |
| Building material emission class | M1 | |
| Coverage |
10 - 12 m2/l for absorbing surfaces. 7 -9 m2/l for non-absorbing surfaces. |
|
| Can sizes | A and C base paints 0,225 l, 0,9 l, 2,7 l, 9 l, Base paint A also in 18 l can. | |
| Thinner | Water | |
| Application method |
Brush, roller or spray. For airless spray application, use a nozzle 0.015” – 0.021”. Thinning: If necessary thin up to 10% with water |
|
| Drying time at 23°C and 50% relative air humidity |
Dust dry after 1/2 hour, re-coatable after 1-2 hours. |
|
| Wash resistance | Resists over 5000 brushings. | |
| Chemical resistance | Resists cleaning detergents and weak solvents e.g. White Spirit. | |
| Heat resistance | 85°C ISO 4211-3
|
|
| Solids volume | Approx. 40% depending on the colour shade | |
| Density | Approx 1.3 kg/l depending on the colour shade, ISO 2811 | |
| Storage | Protect from frost. | |
| Product code | 878_6001/3 | |
| MED Certificate | VTT C 2598 15 08 Joker | |
| APPLICATION DETAILS | ||
| Application conditions | The surface to be painted must be dry, the temperature of the air at least 5 ˚C, and the relative humidity of the air below 80 %. | |
| Preparation | New surfaces:
Clean dirt and dust from the unpainted surfaces. Level the surface with Spakkeli or Presto filler, if needed, and sand the dried surface. Remove sanding dust. Paint directly with Joker or prime with Luja universal primer. Previously painted surfaces: Wash down previously painted surfaces with Cleaning Agent (Maalipesu) and rinse carefully with water. Sand down hard, glossy and with alkyd paint treated surfaces matt. Remove sanding dust. Fill cracks and holes with Spakkeli or Presto filler and sand the dried surface. Remove sanding dust. If priming is needed, use e.g Luja Universal Primer before coating. |
|
| Painting | Stir Joker well before use and thin with water, if necessary. Apply by brush, roller or spray 1-2 times. | |
| Cleaning of tools | Clean tools with water and soap. Tikkurila's Pensselipesu (Tool Cleaner) is recommended for cleaning hardened paint. | |
| EU VOC 2004/42/EC-limit value | (cat A/a) 30g/l(2010) | |
| HEALTH AND SAFETY CLASSIFICATION | Not classified as hazardous for health. Handle with care. Avoid prolonged contact with skin and breathing of spray mist. Material Safety Data Sheet available on request. Material Safety Data Sheet - Joker | |
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations for hazardous waste. | |
| TRANSPORT | VAK/ADR - | |
| mke130106/mpy130106/ | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
