 |
PRODUCT DATA SHEET 09.11.2006 |
|
Kiva Furniture Lacquer, semi-matt |
|
|
| DESCRIPTION | Waterborne low-odour non-yellowing acrylate lacquer for use on interior wood surfaces. | |
| PRODUCT FEATURES | For use on interior wood surfaces. Kiva Furniture Lacquer can also be used for the protective lacquering of stained surfaces. Not suitable for use on floors. | |
| RECOMMENDED USES | Tables, chairs, bookshelves, panelled walls and ceilings, doors, toys, etc. Kiva Furniture Lacquer can also be used for the protective lacquering of stained surfaces. | |
| TECHNICAL DATA | ||
 8  14 |
||
| Base paints | EP | |
| Colour Range | Tikkurila Interior Lacquer Colour Card. | |
| Gloss grade | Semi-matt | |
| Building material emission class | M1 | |
| Coverage | 8-14 m2/litre per coat. Actual spreading rates will depend upon many factors including texture, porosity, moisture content of the substrate and method of application. |
|
| Can sizes | 0,225, 0,9, 2,7, 9 l | |
| Thinner | Water | |
| Mixing ratio | Thinning: if necessary by up to 5% with water. | |
| Application method | Brush, sponge or spray. Polyester or nylon paint brushes are best suited for the application of Kiva Interior Lacquer. |
|
| Drying time at 23°C and 50% relative air humidity | Normally touch-dry in ½ hour and recoatable after 2-3 hours. The lacquered surface will reach final hardness after approximately 2 weeks. Hard stress and the placing of objects on the surface should be avoided during this time. |
|
| Special feature | ||
| Wash resistance | Good (DIN 53778) | |
| Chemical resistance | Good (ISO 2812-1). Resists cleaning chemicals, weak solvents e.g. white spirit. Spillage of coffee, tea, etc. should be wiped off immediately.
Good oil and grease resistant. |
|
| Solids volume | Approx. 32 % | |
| Density | Approx. 1,0 kg/l, ISO 2811. | |
| Storage | Protect from frost. | |
| Product code | 853/4/5_6404 | |
| MED Certificate | MED B7150 Kiva | |
| APPLICATION DETAILS | ||
| Application conditions | All surfaces to be painted must be dry, the temperature of the air and substrate at least +10OC, and the relative humidity of the air below 80%. | |
| Preparation | Surfaces must be clean, dry, and free from grease, dirt, oil, wax, all loose material and surface contamination. Wet new wooden surfaces with clean water so as to expose loose wood fibres, allow to dry and sand down. Completely remove existing coatings that are in poor condition. Use suitable Tikkurila products such as cleaning agents and suitable Tikkurila wood fillers for filling cracks, nail holes, blemishes, etc. Ensure that all glossy and filled surfaces are thoroughly flatted down. | |
| Lacquering | Stir thoroughly before and during use. Apply two to three coats of Kiva Furniture Lacquer according to the condition of the surface and required depth of colour. Always work in the direction of the grain and avoid overlapping. The final colour will depend upon the timber species i.e. original colour and hardness. The chosen gloss level will normally be achieved after the application of two coats.
A trial painting on a separate piece of wood is recommended to check the right colour when using tinted product. The final colour of the treated surface depends on wood species, the hardness and the original colour of the wood, and the number of coats applied. Thin tinted lacquer for the first treatment with 20-30% water. Usually the desired result will be achieved with two coats. Treat surfaces always without a break and large panel surfaces a few panels at a time to achieve an uniform colour. |
|
| Cleaning of tools | Clean with water immediately after use. Tikkurila Pensselipesu (Tool Cleaner) is recommended to be used for cleaning hardened paint from tools. | |
| Maintenance instructions | Do not clean earlier than 1 month after treatment.
Clean the surface with a damp cloth, sponge or soft brush and with neutral (pH 6-8) detergent. The surface must not be left wet after cleaning. Very dirty surfaces can be cleaned with a slightly alkaline (pH 8-10) detergent using e.g. a cloth, mop or sponge. Rinse the surface carefully. |
|
| Maintenance treatment | Maintain with Kiva Furniture Lacquer or a similar water-borne lacquer. | |
| EU VOC 2004/42/EC-limit value | (cat A/e) 130g/l(2010) | |
| HEALTH AND SAFETY CLASSIFICATION | The product is not classified as dangerous. A Material Safety Data Sheet is available on request. Material Safety Data Sheet - Kiva Furniture Lacquer | |
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations. | |
| TRANSPORT | VAK/ADR - | |
| FURTHER INFORMATION | ||
| mli231006/lko071106/tho261006/853-s,854-s,855-s | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
