Tikkurila worldwide
PRODUCT DATA SHEET
01.10.2011

Nostalgia Wood Wax

nostalgia wood wax 1L
DESCRIPTION Protective liquid wax for wood.
PRODUCT FEATURES

Suitable for untreated paneled walls and ceilings, furniture, doors and window frames in dry interior rooms.  

RECOMMENDED USES Suitable for untreated paneled walls and ceilings, furniture, doors and window frames in dry interior rooms.

TECHNICAL DATA
  The paint is suitable for interior walls Tool: spray Tool: brush
The coverage of the paint on rough surfaces
10
The coverage of the paint on smooth surfaces
13
Colour Range Ready shades: Honey, Raisin, Coconut.
Other shades: Champignon, Chocolate, Blue Cheese, Oyster, Earl Grey and Pepper from Nostalgia colour card.
These shades can be tinted from the natural coloured Ginger.
Ginger can also be used as such. See colour sticker on the can.
See Nostalgia brochure/colour card!

Note! Use tinted product within 3 months from tinting to avoid eventual change in the colour!
Gloss grade undefined
Coverage 10-13 m2/l depending on the porosity of the surface.
Can sizes 0.225 l, 0.333 l, 0.9 l, 1 l
Mixing ratio Use unthinned product, for more transparent effect thin the wax with colourless Ginger base wax.
Application method Brush, clean cloth or spray, polishing rag or buffing cloth.
Drying time at 23°C and 50% relative air humidity

Dust dry approx. ½-1 h. Recoatable after 1-2 h. Ready for use after 24 h.

Solids volume approx 24 w %.
Density 1 kg/l, ISO 2811.
Storage Protect from frost!

APPLICATION DETAILS
Application conditions The surface to be treated must be dry, temperature at least +5 oC and relative humidity of the air below 80 %.
Preparation Clean the surface from dirt and dust. Moisten it lightly with water spray, let the surface dry, grind off the protruding woodfibres and dust off.
Treatment Mix Nostalgia Wood Wax carefully, also occasionally during application. Apply 1-2 layers in direction of the wood grain. The wax is liquid and it is easiest to spread with foam plastic trowel or sponge. Two wax layers give more glossy and waxy surface.
Before you start, test the wax in a hidden spot. The final colour and gloss are affected by the properties of wood species. Handle the small surfaces throughout consecutively, large panel surfaces 1-2 boards at a time to obtain a uniform colour. Should you like a more translucent finish, thin it with colourless Wood Wax (Ginger), do not use water for thinning!
Cleaning of tools Clean the tools with water and soap. Tikkurila Pensselipesu (Tool Cleaner) is recommended for removal of hardened Nostalgia Wood Wax.
Maintenance instructions Handle the surfaces with care during few weeks after the treatment as the product achieves its final hardness and durability after approx.1 month in normal conditions. If the surfaces need to be cleaned soon after surface treatment, clean them lightly with a soft brush or damp cloth. Remove stains as soon as possible with a damp cloth and neutral (pH 6-8) detergent.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available on request.Safety Data Sheet - Nostalgia Wood Wax

ENVIRONMENTAL and WASTE DISPOSAL Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations.
TRANSPORT VAK/ADR -
sre190711 / ome200711