 |
PRODUCT DATA SHEET 03.03.2008 |
|
Ässätex Kosteatilaliima (Adhesive for Humid Rooms) |
|
|
| DESCRIPTION | Water-borne dispersion adhesive. | |
| PRODUCT FEATURES | For fixing ÄSSÄTEX glass fibre wallpaper, vinyl wallpaper, PVC-wallcoverings and foamed wallcoverings in humid and dry interior premises. Is also suitable to be used as a fixing adhesive for glass fibre wallpaper in Tikkurila Luja system, as a lap joint adhesive and on the PVC-surface when fixing wallpapers. | |
| RECOMMENDED USES | Humid and dry interior premises. | |
| TECHNICAL DATA | ||
 3  5 |
||
| Coverage | 3-5 m2 /l (200-350 g/m2). | |
| Can sizes | 5 l, 15 l. | |
| Thinner | Water | |
| Application method | Paint roller and geared spatula. | |
| Open time | On absorbent surfaces approx. 10-15 minutes and non-absorbent surfaces approx. 20 minutes at the temperature of 20 °C. | |
| Solids volume | 1,0 kg/l | |
| Storage | Protect from frost. | |
| Product code | 008_3262 | |
| APPLICATION DETAILS | ||
| Application conditions | The surface, primer and adhesive have to be room temperature. The recommended fixing temperature of the air is +18 °C - 20 °C. | |
| Preparation | Use Presto LV filler as a filler for humid premises and Presto LF filler in dry premises. The absorbent surfaces have to be dry, clean, even and solid. Prime very porous surfaces with a mixture made of 1 volume part adhesive and 3 volume parts water. Fill holes, sand the surface and remove sanding dust carefully. For absorbent surfaces apply the adhesive as wet glueing.
Wash down non-absorbent surfaces such as vinyl, laminate or painted surfaces with Maalipesu cleaning detergent and rinse carefully. Fill holes and sand the whole surface. Remove sanding dust carefully. Depending on the conditions, let the adhesive dry a little bit after application e.g. about 15-30 minutes before fixing the covering. |
|
| Wallpapering | Ässätex glass fibre wallpaper, textile or glass fibre based vinyl wallpaper, homogeneous, foamed PVC-wallcovering:
Stir adhesive well before use. Apply the adhesive with a roller on about 1 pelt wide at a time. Fix the covering well with upholstery roller or spatula, so that the airbubbles disappear. Set the pelts into the butt joint or joint on the wall. Paperbased vinyl wallpaper: Stir adhesive well before use. Apply the adhesive on the back of the pelt. Allow the wallpaper wet for about few minutes before fixing, do not fold the pelt. Fix by using butt joint. Follow the instructions given by the manufacturer of the wallcovering. Note! When fixing wallpapers in bath or shower room, avoid using water for about a week. |
|
| Painting | Paint the wallcovering after 24 hours from fixing. | |
| Removal of glue stains | Clean fresh adhesive spots with moistened cloth or sponge. | |
| Cleaning of tools | Clean tools with e.g. lukewarm water. | |
| HEALTH AND SAFETY CLASSIFICATION | The product is not classified as dangerous. A Material Safety Data Sheet is available on request.Material Safety Data Sheet - Ässätex Adhesive for Humid Rooms | |
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations. | |
| TRANSPORT | VAK/ADR - | |
| ssa030308/ars280308/MTL210795/MSS240795/0083262 | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
