 |
PRODUCT DATA SHEET 03.03.2008 |
|
Ässätex Kuivatilaliima (Adhesive) |
|
|
| DESCRIPTION | Water-borne dispersion adhesive. | |
| PRODUCT FEATURES | For fixing ÄSSÄTEX glass fibre wallpaper and other similar glass fibre cloths, textile cloths and heavy paper based wallcoverings in dry interior premises. | |
| RECOMMENDED USES | Dry interior premises | |
| TECHNICAL DATA | ||
 4  5 |
||
| Coverage | 4-5 m2/l. | |
| Can sizes | 5 l, 15 l | |
| Thinner | Water | |
| Application method | Paint roller and geared spatula. Application as wet glueing. | |
| Open time | Approx. 15-20 minutes in temperature of +18 - +20 °C.
On absorbent surfaces fixing has to be done immediately, on non-absorbent surfaces after 10-20 minutes. |
|
| Special feature | If desired, a latex paint used for the finishing can be mixed with the adhesive e.g. 1 volume part paint to 1 volume part adhesive. In this way, the shade achieved is close to the shade of the finishing paint, and the glass fibre cloth can be primed with the mixture. | |
| Density | 1.0 kg/l | |
| Storage | Protect from frost. | |
| Product code | 008_3261 | |
| APPLICATION DETAILS | ||
| Application conditions | The recommended fixing temperature of the air is +18 °C + - 20 °C. | |
| Preparation | The surface has to be dry, clean, even and solid.
Wash down previously painted surfaces with Maalipesu cleaning agent and rinse carefully with water. Fill holes and cracks with a suitable Spakkeli or Presto filler and sand the dried surface. Remove sanding dust. Prime very porous surfaces with water thinned Ässätex adhensive or with Jehu Primer. |
|
| Wallpapering | Stir adhesive well before use. When fixing glass fibre cloth, apply the adhesive with a roller on about 1-2 pelts wide at a time. If desired, a latex paint used for finishing can be mixed with adhesive e.g. 1 volume part paint to 1 volume part adhesive. In this way, the shade achieved is close to shade of the finishing paint, and the glass fibre cloth can be primed with the mixture.
Set the pelt in its place and press it hard onto the substrate. After the adhesive or the mixture made of adhesive and finishing paint has dried about 24 hours, prime the cloth with the mixture of adhesive and finishing paint, or with finishing paint thinned with 10 % of water. Finish after priming coat has dried. When fixing textile coverings and paper based wall coverings, apply the adhesive with a roller onto the bottom of the covering, and let it wet about 5-10 minutes, after which time the covering can be fixed. Follow the instructions given by the manufacturer of the wallcovering. |
|
| Removal of glue stains | Clean fresh adhesive with a damp rag or sponge. | |
| Cleaning of tools | Clean excess paint from the tools and clean immediately with water. | |
| HEALTH AND SAFETY CLASSIFICATION | The product is not classified as dangerous. A Material Safety Data Sheet is available on request.Material Safety Data Sheet - Ässätex Adhesive | |
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations. | |
| TRANSPORT | VAK/ADR - | |
| ssa030308/ars010408/MTL210795/MSS240795/0083261 | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
