Tikkurila uses cookies to ensure the best possible user experience. If you continue on our site, you will approve the use of cookies. Read more.
Tikkurila worldwide
(Previous date 13.02.2008)'

Feelings Moisture Stop

Feelings moisture stop 3l

For interior walls and ceilings treated with Tikkurila Presto LV Humid Room Filler, and on various building boards, glass fibre wallpapers etc.

RECOMMENDED USES Particularly suitable for wet areas of kitchens, bathrooms, shower rooms, utility rooms, swimming pool areas etc.

  The paint is suitable for interior walls The paint is water-borne Tool: roller Tool: spray Tool: brush
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Colour Range Translucent green.
Coverage 4-6 m2/l, two coats applied, unthinned.
The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.

Can sizes 3 l
Thinner Water
Application method Brush, roller or spray application. Thinning: when necessary, thin with water.

Drying time at 23°C and 50% relative air humidity Normally touch-dry in 4 hours and

recoatable with Feelings Extra Durable paint after approx. 4 hours.

Solids volume Approx. 39%
Density Approx. 1.2 kg/l, ISO 2811
Storage Protect from frost.
Product code 005_3457

Application conditions All surfaces to be painted must be dry, the temperature of the air at least +10ºC and the relative humidity of the air below 80%.
Preparation Remove all dirt and dust. If surface to be treated has mould damages, find out the reason for them and repair them carefully before painting. Remove loose, flaking paint with a scraper. Remove vinyl wall coverings and ceramic tiles in full. Sand glossy paint surfaces to a matt finish. Wash the surface with Maalipesu (Cleaning Agent), if necessary and rinse carefully with water. Fill concrete, plaster etc. surfaces with Presto LV Humid Room Filler. Sand the surface and remove sanding dust.
Surface treatment Stir Feelings Moisture Stop well before use. Apply two coats of moisture stop with a roller and finish off corners and inlets by brush. Allow to dry for 1-4 hours between treatments.
Finish with Feelings Extra Durable after approx. 4 hours from the second treatment with moisture stop.
Cleaning of tools Clean with water immediately after use. Tikkurila Pensselipesu (Tool cleaner) is recommended for removing hardened paint.
EU VOC 2004/42/EC-limit value (cat A/i) 140g/l (2010) Feelings Moisture Stop contains VOC max. 140g/l.

according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Material Safety Data Sheet is available on request. Safety Data Sheet - Feelings Moisture Stop

ENVIRONMENTAL and WASTE DISPOSAL Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT VAK/ADR: not classified
ser080713 / ssa130308 / joa260308 / ars070408 / 0053457