Tikkurila worldwide
PRODUCT DATA SHEET
28.06.2013
(Previous date 01.10.2007)'

Presto J - Joint Filler

Presto J Filler
DESCRIPTION M1 classified water-borne, ready-to-use filler for filling gypsum board seams. Filling ability: 2 mm with no cracking.
PRODUCT FEATURES To fill gypsum board seams and especially to adhere seam ribbons in dry interior premises. Apply by hand with a smoothing trowel or use an automatic taper “Bazooka”.
RECOMMENDED USES Walls and ceilings in dry interior premises.

TECHNICAL DATA
  The paint is suitable for interior walls The paint is suitable for ceilings The paint is water-borne Työväline: teräslasta
Colour Range Light grey
Building material emission class M1
Can sizes 3 l, 10 l.
Thinner Water
Application method Steel trowel or automatic taper.
Drying time at 23°C and 50% relative air humidity 2-24 hours depending on thickness of coat, temperature and the relative humidity of the air.
Solids volume 46 %
Density 1.4 kg/l, ISO 2811
Storage Protect from frost
Product code 001_6537

APPLICATION DETAILS
Application conditions The surface to be treated must be dry, the temperature of the air over
5 ºC, and the relative humidity of the air below 80 %.
Preparation Use a brush to remove dust and loose material.
Filling By hand:
Use a steel smoothing trowel to apply Presto J to fill any depressions formed by feather edges. Use the trowel to press the seam ribbon into the moist filler. Spread the filler extruding from the sides on top of the seam ribbon. If necessary, apply more filler on top of the seam ribbon to fill the seam.

Mechanically:
Work the joints in accordance with the equipment manufacturer´s instructions.

When the filler has dried, apply 1-2 coats of Presto LH Light Filler or Presto R Roller Filler. When the filler has dried, sand the surface.
Cleaning of tools Clean tools with water.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available on request.Safety data sheet

DECLARATION OF PERFORMANCE Declaration of Performance EN13963

ENVIRONMENTAL and WASTE DISPOSAL Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT VAK/ADR not classified
joa140613 / mtl / pih140613 / 001 6537


CE
CE logo
Tikkurila Oyj
Kuninkaalantie 1
FI-01300 Vantaa
13
Nro TIK-1650-5005
EN 13963:2005
Jointing material of gypsum plasterboards - Type 1A
Flexural strength
> 320 N
Release of dangerous substances
NPD
Reaction to fire
A2-s1,d0