Tikkurila uses cookies to ensure the best possible user experience. If you continue on our site, you will approve the use of cookies. Read more.
Tikkurila worldwide
PRODUCT DATA SHEET
28.06.2013
(Previous date 01.10.2007)'

Presto LF - Renovation Filler

Presto LF Renovation Filler
DESCRIPTION Water-borne, ready to use renovation filler. Filling ability: 4 mm without cracking. Minor shrinkage and good adhesion.
PRODUCT FEATURES Especially suitable for previously painted surfaces, total or partial filling of gypsum board, wood fibre board, smooth concrete, and plaster surfaces, but also chipboard and wood fibre board. Also ideal for filling gypsum board seams and fastening seam ribbon.
RECOMMENDED USES Walls and ceilings in dry interior premises.

TECHNICAL DATA
  The paint is suitable for interior walls The paint is suitable for ceilings The paint is water-borne Työväline: teräslasta
Colour Range Nearly White
Building material emission class M1
Can sizes 200 ml, 500 ml, 3 l, 10 l.
Thinner Water
Mixing ratio Water, usually not thinned.
Application method Smoothing trowel
Drying time at 23°C and 50% relative air humidity Sanding and painting of the surface can be carried out after the filler has totally dried, under normal conditions after 2-24 hours depending on the layer thickness, temperature and the relative humidity of the air.
Particle/grain size

max. 0,15 mm

Solids volume 61 %
Density 1.2 kg/l, ISO 2811
Storage Protect from frost.
Product code 001_6532
Shrinkage and cracking Minor shrinkage and good adhesion.

APPLICATION DETAILS
Application conditions The surface to be treated must be dry, the temperature of the air over
5 º C and the relative humidity of the air below 80 %.
Preparation Unpainted surfaces:
Remove any dirt and grease. Brush off any dust or loose material. Plane the surfaces directly with Presto LF Renovation Filler.

Previously painted surfaces:
Wash down previously painted surfaces with Maalipesu (Cleaning Agent) cleaning detergent and rinse thoroughly with water. Remove loose paint with a scraper and sand hard, glossy surfaces matt. Remove sanding dust. Apply Presto LF Renovation Filler with a smoothing trowel.
Filling Apply Presto LF Renovation Filler with a smoothing trowel. Sand the dried surface and remove sanding dust. Apply another filling coat, if necessary.
Cleaning of tools Clean tools with water.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available on request.Safety Data Sheet - Presto Fillers

DECLARATION OF PERFORMANCE Declaration of Performance EN13963 Declaration of Performance EN15824

ENVIRONMENTAL and WASTE DISPOSAL Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT ADR: not classified
joa170613 / pih140613 / 001 653


CE
CE logo
Flexural strength>320 NRelease of dangerous substancesNPDReaction to fireA2 -s1, d0
Tikkurila Oyj
Kuninkaalantie 1
FI-01300 VANTAA
13
TIK-1650-5003A
EN 13963:2005
Jointing material of gypsum plasterboards - Type 3A


CE
CE logo
Release of dangerous substancesNPDReaction to fireB -s1,d0Adhesion strength by pull off test≥ 0,3MPa
Tikkurila Oyj
Kuninkaalantie 1
FI-01300 VANTAA
13
TIK-1650-5003B
EN 15824:2009
Internal plaster based on organic binder