Tikkurila worldwide
PRODUCT DATA SHEET
01.10.2011

Nostalgia Floor Oil

DESCRIPTION Carnauba and candelilla wax based breathable oil for interior use
PRODUCT FEATURES

To be used on bare wooden surfaces. Absorbs into the wood and protects the surface from dirt, stains and humidity.

RECOMMENDED USES Furniture, wall and ceiling panels, wooden To be used on bare wooden surfaces. Absorbs into the wood and protects the surface from dirt, stains and humidity.

TECHNICAL DATA
  The paint is suitable for interior floors The paint is solvent-borne Tool: spray Tool: brush
The coverage of the paint on rough surfaces
9
The coverage of the paint on smooth surfaces
13
Colour Range Colourless, deepens and enhances the wood colour.
Gloss grade undefined
Coverage 9-13 m2/l depending on the porosity of the surface.
Can sizes 1 l, 3 l
Thinner White Spirit 1050
Application method Brush, clean cloth or spray, polishing rag or buffing cloth.
Drying time at 23°C and 50% relative air humidity

Recoatable after approx. 12 h. Ready for use after approx. 24 h.

Solids volume approx 80 w %.
Density 0.9 kg/l, ISO 2811.
Storage Unaffected by cold storage or transportation.

APPLICATION DETAILS
Application conditions The moisture content of the wood should not exceed 16 %, the temperature of the air has to be above +8°C and relative humidity of air below 80 %.
Preparation Clean the surface carefully from dirt and dust and let it dry. Remove thoroughly any previous coating by sanding or scraping, dust off.
Treatment Apply the first coat of Nostalgia Floor Oil with a brush, cloth or spray and let it absorb into the wood 5-10 min. Wipe off unabsorbed oil and polish the floor with a cloth. Let the surface dry for 12 hours and renew the treatment. Two coats of Floor Oil is usually enough.
Cleaning of tools Clean the tools first with soap and warm water, remove the rest using Tikkurila White Spirit 1050.
Maintenance instructions Clean the surface lightly with a damp sponge or cleaning cloth and a neutral (pH 6-8) detergent. The surface should not remain wet. Renew the oil treatment if necessary. Heavily soiled and darkened surfaces can be scraped or sanded prior to processing.
Maintenance treatment Retreat worn out surface with Nostalgia Floor Oil. Regularly treated surface is water repellent, easy to keep clean and durable.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Contains: Chinese wood oil. MAY CAUSE SENSITIZATION BY SKIN CONTACT. Do not breathe vapour/ spray. Use only in well-ventilated areas. Avoid contact with skin. Wear suitable gloves. If swallowed, seek medical advice immediately and show this container or label. Keep out of the reach of children. A Safety Data Sheet is available on request.Safety Data Sheet - Nostalgia Floor Oil

Irritant
Irritant
ENVIRONMENTAL and WASTE DISPOSAL Avoid spillage into drains, water systems and soil. Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste. Risk of self-ignition! Cleaning cloths, sanding dust or overspray containing the product can create fire by self-ignition. Waste like this should be collected and stored in water before disposal, or dried preferably outdoors or incinerated immediately.
TRANSPORT VAK/ADR 3 III
sre190711 / ome200711