 |
PRODUCT DATA SHEET 01.01.2012 |
|
Öljypohja - Oil primer |
|
|
| DESCRIPTION | Alkyd Oil Priming Paint for exterior painting of bare wooden surfaces before finishing with oil or acrylic paints. Also suitable for painting surfaces previously treated with oil paint.If the previously painted surface is painted with acrylate paint, also use acrylate paint for top coating after painting with Öljypohja. | |
| PRODUCT FEATURES | Alkyd Oil Priming Paint for exterior painting of bare wooden surfaces before finishing with oil or acrylic paints. Also suitable for painting surfaces previously treated with oil paint.If the previously painted surface is painted with acrylate paint, also use acrylate paint for top coating after painting with Öljypohja. |
|
| RECOMMENDED USES | Exterior walls, window frames, railings, fences. | |
| TECHNICAL DATA | ||
 5  10 |
||
| Base paints | AP and C | |
| Colour Range | White AP base paint can be tinted approximately to the colour of the finishing paint. Colours made from the C-base should be tinted to the same colour as the finishing paint. Colour accuracy is not perfect. | |
| Gloss grade | Matt | |
| Coverage | Sawn surfaces 5 - 8 m2/l. Planed surfaces: 8 -10 m2/l. |
|
| Can sizes | 0.9 l, 2.7 l and 9 l | |
| Thinner | White Spirit 1050 | |
| Application method | Brush | |
| Drying time at 23°C and 50% relative air humidity | Recoatable after 24 hours. Drying time depends on temperature, relative humidity of the air, porosity of the substrate and film thickness. | |
| Solids volume | 56 % | |
| Density | 1.4 kg/l, SFS 3635. | |
| Storage | Unaffected either by cold storage or transport. Poorly closed or short canisters do not resist long storing. | |
| Product code | 206_6201 | |
| APPLICATION DETAILS | ||
| Application conditions | The surface to be treated has to be dry i.e. the humidity of the wood has to be under 20 %. During painting and drying the temperature of the air should be at least +5°C and the relative humidity of the air under 80 %. | |
| Preparation | Unpainted surfaces:
Clean the surface from all dirt, mould and loose material. Prime the surface at earliest possible stage with Valtti Base. Touch up nail heads, and other rusting metal parts with Rostex Super Metal Primer. Remove resin from knots and treat them with Oksalakka Knotting Lacquer. Previously painted surfaces: Remove all loose material with a scraper and clean the surface with a steel brush. Wash down dirty and mould affected surfaces with Mould Removal (Homeenpoisto ) or with Tehopesu Super Clean according to the instructions for use. Treat bare wooden surfaces with Valtti Base. |
|
| Finishing | Stir Öljypohja well before use and apply once by brush. Treat the end-grains with special care.
Finishing painting is recommended to be done as soon as possible after priming, however in 6-10 months the latest. |
|
| Cleaning of tools | Clean tools with White Spirit 1050 or with Tikkurila Pensselipesu (Tool Cleaner) | |
| EU VOC 2004/42/EC-limit value | (cat A/g) 350g/l(2010) Öljypohja contains VOC max. 350g/l. | |
| HEALTH AND SAFETY CLASSIFICATION | Contains: Naphtha, hydrotreated heavy and tolylfluanid FLAMMABLE. HARMFUL BY INHALATION. Do not breathe solvent vapour. Use only in well-ventilated areas. If swallowed, seek medical advice immediately and show this container or label. Keep out of the reach of children. Contains ethyl methyl ketoxime, tolylfluanid and cobalt salt. May produce an allergic reaction. A Safety Data Sheet is available at request. Material Safety Data Sheet - Öljypohja | |
 Harmful |
||
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Avoid spillage into drains, water systems and soil. Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste. Risk of self-ignition! Cleaning cloths or sanding dust containing the product can create fire by self-ignition. Waste like this should be collected and stored in water before disposal, or dried preferably outdoors or incinerated immediately. | |
| TRANSPORT | VAK/ADR 3 III | |
| sre090312/niear120312/ssa100308/uha300403/206 6201 | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
