Tikkurila worldwide
PRODUCT DATA SHEET
18.12.2013
(Previous date 15.12.2011)'

Lumi - Interior Wall Paint

Lumi_tayshimmea_9L
DESCRIPTION Extremely white and well-hiding acrylate paint for interior use
PRODUCT FEATURES Lumi is suitable for interior painting of plaster, concrete, filler treated, brick, cardboard and wooden surfaces, also for cardboard-finished gypsum board, chipboard and wood fibre board surfaces. Suitable for new and previously painted surfaces. Not suitable for painting of doors and furniture.
RECOMMENDED USES Walls in living rooms and bedrooms and other similar dry facilities.

TECHNICAL DATA
  The paint is suitable for interior walls The paint is full-matt The paint is water-borne Tool: roller Tool: spray Tool: brush
The coverage of the paint on rough surfaces
7
The coverage of the paint on smooth surfaces
12
Base paints AL
Colour Range White Lumi Paint can be used as such or tinted according to the Lumi guide and colour card. Can be tinted to the white and light shades of the Feel the Colour- collection.
Gloss grade Full-matt
Building material emission class M1
Coverage

Absorbent surfaces 7 - 9 m2/l. Non-absorbent surfaces 10 - 12 m2/l.

Can sizes 0,9 l, 2,7 l, 9 l, 18 l.
Thinner Water
Application method

Roller or spray. Edges can be painted by brush.

Drying times

Dust dry in half an hour. Re-coatable after 1-2 hours.

Chemical resistance Resists cleaning chemicals and weak solvents, such as White Spirit.
Heat resistance 85 °C, ISO 4211-2 ja ISO 4211-3.
Wet scrub resistance SFS-EN 13300 class II, ISO 11998.
Solids volume Approx. 40 % depending on shade.
Density Approx. 1.5 kg/l depending on shade, ISO 2811.
Storage Protect from frost.
Product code 671_6081

APPLICATION DETAILS
Application conditions The surface to be treated must be dry, the temperature of the air at least +5oC, and the relative humidity of the air below 80 %
Preparation New surfaces:
Remove dirt and dust from the unpainted surfaces. Fill the surfaces with a suitable Presto filler, if needed, and sand the dried surface. Remove sanding dust. Prime with e.g. Luja Universal Primer.
Previously painted surfaces:
Wash down previously painted surfaces with Maalipesu cleaning detergent and rinse carefully with water. Sand hard and glossy surfaces matt. Remove sanding dust. Fill cracks and holes with a suitable Presto filler and sand the dried surface. Remove sanding dust. Prime with e.g. Luja Universal Primer, if needed, before applying the top coat.
Painting New surfaces:
Stir Lumi Interior Wall Paint well before use and thin with water, if necessary. Apply 1-2 times by roller or spray. Edges can be painted by brush.


Cleaning of tools Remove excess paint from tools and clean them with water. Tikkurila Tool Cleaner is recommended for removal of hardened paint.
Maintenance instructions Cleaning earliest abt. 1 month after application of the finish, if needed.

The surfaces are cleaned with a dry brush or dust towel. Dirty surfaces are cleaned with a well squeezed damp, soft sponge or cleaning cloth and neutral (pH 6 – 8) washing detergent. Dilution instructions given by the detergent producer have to be followed by preparing the washing dilution. The surface must be dried after the cleaning.

The product achieves its final hardness and durability after one month under normal conditions, therefore the surfaces must be handled with care during this time. If the surfaces need to be cleaned soon after finishing, clean them lightly with a dry or damp cleaning cloth.

The product achieves its final hardness and durability after one month under normal conditions, therefore the surfaces must be handled with care during this time. If the surfaces need to be cleaned soon after finishing, clean them lightly with a damp cleaning cloth or mop.
Maintenance treatment Maintenance painting:
Surfaces painted with Lumi Interior Wall Paint can be recoated with waterborne wall paints. See preparation.
EU VOC 2004/42/EC-limit value (cat A/a) 30g/l(2010)

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available on request. Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT VAK/ADR -
sre250714 / lko230909 / ome220909 / 6716081