 |
PRODUCT DATA SHEET 09.12.2008 |
|
Pohjustegeeli - Primer Gel - NEW |
|
|
| DESCRIPTION | Water-borne, alkali-resistant silicone based primer for masonry surfaces. | |
| PRODUCT FEATURES | Priming exterior concrete and plastering surfaces. Used for priming when mixed with paint according to data sheet, e.g. Kivisil facade paint. Can also be used for impregnating untreated concrete facade surfaces or similar vertical concrete surfaces. |
|
| RECOMMENDED USES | Exterior masonry surfaces of residential, commercial and storage premises. | |
| TECHNICAL DATA | ||
 4  5 |
||
| Coverage | Mixed with paint: See data sheet for paint, e.g. Kivisil facade paint. Impregnation: 4-5 m2/l. |
|
| Can sizes | 1 l | |
| Thinner | Water | |
| Application method | Mixed with paint: see data sheet for paint. Impregnation: Apply Primer Gel by airless spraying, brush or roller. |
|
| Drying time at 23°C and 50% relative air humidity | 2 to 5 hours. The next treatment can be made the following day. | |
| Solids volume | Approx. 75 % | |
| Density | Approx. 0,9 kg/l, ISO 2811 | |
| Storage | Protect from frost. Must not be stored in temperatures over + 30 ºC. | |
| APPLICATION DETAILS | ||
| Application conditions | The surface to be treated must be clean and dry, the temperature at least +5 ºC and relative air humidity below 80 %.
Do not apply the product to a damp or non-absorbent base. |
|
| Preparation | - mixed with paint: See data sheet for paint.
- impregnation: Treat concrete element surfaces after one heating period. Remove dirt, dust, and segregated salts from the surface. |
|
| Surface treatment | - mixed with paint:
Stir Primer Gel before use. Add Primer Gel to the paint and mix thoroughly (mechanically for approx. 5 minutes). See data sheet for paint for more instructions and details of mixture ratio. - impregnation: Apply Primer Gel evenly by airless spraying. Can also be applied with a brush or roller. Apply preferably from the bottom up on vertical surfaces. Immediately clean any splashes off windows, which should be protected before priming and painting. |
|
| Cleaning of tools | Rinse tools with water or Tikkurila Pensselipesu (Tool Cleaner). | |
| HEALTH AND SAFETY CLASSIFICATION | Contains: Triethoxy(2,4,4-trimethylpentyl)silane HARMFUL TO AQUATIC ORGANISMS, MAY CAUSE LONG-TERM ADVERSE EFFECTS IN THE AQUATIC ENVIRONMENT. Do not empty into drains. A Material Safety Data Sheet is available on request. Material Safety Data Sheet - Pohjustegeeli | |
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations. | |
| TRANSPORT | VAK/ADR - | |
| 0066400/ars091208/dco141008 | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
