Tikkurila uses cookies to ensure the best possible user experience. If you continue on our site, you will approve the use of cookies. Read more.
Tikkurila worldwide
PRODUCT DATA SHEET
16.01.2013

Presto Window Putty

Presto Window Putty
DESCRIPTION Waterborne, recoatable quick-drying special glazing putty for interior and exterior windows and doors.
PRODUCT FEATURES

Window glazing and filling of small cracks and crevices on wooden substrates. Also suitable for glass, paint, PVC and zinc-coated steel surfaces.

 

Also suitable for sealing joints in interior walls and ceilings and filling of small cracks. Can be recoated with Tikkurila interior wall and ceiling paints.

RECOMMENDED USES Interior and exterior window frames. Recoatable with e.g. Unica Akva, Teho Window Paint, Helmi Furniture Paint or Maalarin Valkolakka.

TECHNICAL DATA
  The paint is suitable for interior walls The paint is suitable for exterior walls The paint is water-borne Painting conditions: relative humidity of the air below 80% and the temperature of the air at least +5ºC Paint must be protected from freezing
Colour Range Off-white
Coverage 100 g/m
Can sizes 300 ml tube
Thinner Water
Application method Application with sealing gun
Drying time at 23°C and 50% relative air humidity

The putty is surface dry after 1-2 hours. Recoatable at the earliest after

8 hours from application. The final curing takes 2-10 days depending on conditions and film thickness.
Density 1.6 kg/l, ISO 2811
Storage Protect from frost
Product code 001 6569

APPLICATION DETAILS
Application conditions The surface to be treated must be dry, the temperature at least +5 C, and the relative humidity of the air below 80 %.
Preparation Remove loose and flaking putty and paint with a scraper from the groove and wood surface. Sand and wire brush the surface clean.
Application Prime exterior bare wood surfaces of grooves with Valtti Base or Valtti Akvabase. Apply a priming coat of Unica Akva or Teho Window Paint on exterior surfaces and Unica Akva, Helmi Primer, Jehu or Otex on interior surfaces. Cut the tube tip diagonally with a knife big enough to make sure that the putty fills the whole groove with one application. Place the tube in the sealing gun and apply directly from the tube to the groove.
Apply a finishing coat of Unica Akva or Teho Window Paint on exterior surfaces and Unica Akva, Helmi Furniture Paint or Maalarin Valkolakka 2 times on interior surfaces at the earliest 8 hours from the application of putty. The paint must overlap 1-2 mm onto the window glass.
Cleaning of tools Clean the tools with water and soap

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Contains: 2-(2-Heptadec-8-enyl-2-imidazolin-1-yl)ethanol Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Keep out of the reach of children. Do not empty into drains. A Safety Data Sheet is available on request. Safety Data Sheet - PRESTO Window Putty

ENVIRONMENTAL and WASTE DISPOSAL Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT ADR: not classified
-