Tikkurila worldwide
PRODUCT DATA SHEET
11.01.2016
(Previous date 19.11.2015)'

ClimateCooler Catalyst

climatecooler_catalyst
DESCRIPTION Self-cleaning, flexible, heat reflecting water-borne modified acrylate paint with photocatalytic effect. Breaks down harmful NOx compounds into harmless NO3⁻ compounds (salts).
PRODUCT FEATURES

For painting of new and old roofs.

RECOMMENDED USES Bitumen, concrete tile, fiber-cement sheet and primed steel sheet roofs.

TECHNICAL DATA
  The paint is suitable for roofs The paint is matt The paint is water-borne Tool: spray Tool: brush
The coverage of the paint on rough surfaces
3
The coverage of the paint on smooth surfaces
4
Features Solar reflectance: Reflects up to 80 % of heat radiation.
Photocatalytic effect acc. to ISO 22197-1: Test method for air-purification performance of semi-conductive photocatalytic materials. – Removal of nitric oxide.
Colour Range White.
Gloss grade Matt
Coverage 3-4 m2/l applied twice, depending on substrate.
Can sizes 20 l
Thinner Water
Application method Brush, roller or spray (airless). High pressure spray nozzle 0,019" - 0,021" (nominal angle 40°- 50°).
Drying time at 23°C and 50% relative air humidity Withstands rain and dew 1-2 hours after application. Drying will be slower with higher relative humidity of the air and at lower temperatures. A second coat can be applied earliest 3-4 hours after the first coat.
Weather resistance Good also in industrial and marine climate.
Solids volume approx.42 %.
Density approx. 1.4 kg/l, ISO 2811.
Storage Protect from frost.

APPLICATION DETAILS
Application conditions The surface to be painted must be solid and dry, air temperature at least +8C and relative humidity of the air below 80 %. Schedule the painting work so that paint film will be dry before the evening dew. Do not paint under the risk of rain.
Preparation Clean the surfaces from dirt, dust, moss and lichen. Use high pressure washer, avoiding damaging the substrate and structures.
Applicable national health and safety precautions must be followed in the treatment of substrates containing asbestos.
Priming Use ClimateCooler Uni Primer on top of concrete roof tiles, fiber cement sheets or primed steel sheet.
Use ClimateCooler Flex Primer on top of bitumen or fiber cement sheets.
Finishing Mix the paint carefully before use.

Apply one or two coats of ClimateCooler Catalyst, total wet film thickness 200-225 µm.

Note! Check the condition of the roof before starting the work.
The product contains film protecting agents, therefore rainwater flowing from the roof is not recommended to be used for watering plants or washing during the first year from painting.
Cleaning of tools Clean tools with water. Slightly hardened tools can be cleaned with Pensselipesu Tool Cleaner.
Maintenance instructions Handle the painted surface with care. The surface achieves its final hardness and durability within approx. 4 weeks.
Earliest after 1 month of application the surface can be cleaned with ClimateCooler Cleaner (mixing ratio 1 part of cleaner in 50 parts of water).
Maintenance treatment Surfaces painted with ClimateCooler Catalyst should be maintenance painted with the same system.
EU VOC 2004/42/EC-limit value (cat A/i) 140g/l(2010)
ClimateCooler Catalytic Flex contains VOC max. 140 g/l.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Harmful to aquatic life with long lasting effects. Contains reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1) and 2-octyl-2H-isothiazol-3-one. May produce an allergic reaction. Wear protective gloves. Avoid release to the environment. A Safety Data Sheet is available on request. CLIMATECOOLER CATALYST

ENVIRONMENTAL and WASTE DISPOSAL Avoid spillage into drains, water systems and soil. Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste.
TRANSPORT Not classified.
-