Tikkurila uses cookies to ensure the best possible user experience. If you continue on our site, you will approve the use of cookies. Read more.
Tikkurila worldwide
PRODUCT DATA SHEET
18.12.2013
(Previous date 02.07.2013)'

Feelings Extra Durable Paint, semi-matt

Feelings Extra Durable Paint
DESCRIPTION Waterborne acrylate latex finishing paint for use on interior walls and ceilings.
PRODUCT FEATURES

Interior painting of concrete, plaster, filler  treated, brick, cardboard, chipboard and wood fibre board surfaces. Suitable for both new and previously painted surfaces.

RECOMMENDED USES Interior walls and ceilings in premises in which high wash and wear resistance is required such as lobbies, staircases, hospital corridors, patient rooms and other surfaces which are subject to higher than normal stress. The product has an approval for indirect contact in food industry (Finnish Food Act 23/2006).

TECHNICAL DATA
  The paint is suitable for interior walls The paint is semi-matt The paint is water-borne Tool: roller Tool: spray Tool: brush
The coverage of the paint on rough surfaces
5
The coverage of the paint on smooth surfaces
8
Base paints A and C
Colour Range White and the complete Tikkurila Symphony Colour Collection
Gloss grade Semi-matt
Building material emission class MED and M1
Coverage 5-8 m2/l per coat.  
The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
Can sizes 0,9 l, 2,7 l, 9 l,
Thinner Water
Application method Brush, roller or spray application. Thinning: if necessary thin by up to 5% with water.
Drying time at 23°C and 50% relative air humidity Normally touch-dry in two hours and recoatable after four hours.  Final hardness will be achieved after 2-3 days.
Wash resistance Very good.
Withstands also washing with cleaning detergents and disinfectants used in hospitals
Wet scrub resistance SFS-EN 13300 Class I, ISO 11998
Heat resistance 85 °C (ISO 4211-2 and ISO 4211-3)
Chemical resistance Withstands solvents, e.g. white spirit
Solids volume Approx. 40 %
Density 1.2 kg/l, ISO 2811
Storage Protect from frost.
Product code 724_6001/3

APPLICATION DETAILS
Application conditions The surface to be painted must be dry, the temperature of the air at least +5 ºC, and the relative humidity of the air below 80 %.
Preparation Unpainted surface:
Remove dirt and dust from the unpainted surfaces. If necessary, fill holes and cracks with suitable Tikkurila Presto filler. Sand the filler and remove sanding dust. Prime with Feelings Universal Primer.
Previously painted surface:
Wash down previously painted surfaces with Cleaning Agent (Maalipesu) according to instructions of use and let dry. Remove loose, flaking paint with a scraper. Sand hard, glossy surfaces to a matt finish and remove sanding dust. Fill holes and cracks with a suitable Tikkurila Presto filler. Sand the filler and remove sanding dust. Prime with Feelings Universal Primer, if necessary.
Painting Stir Feelings Extra Durable well before use. Apply two finishing coats by brush, roller or spray.
Cleaning of tools Clean tools with water immediately after use. Tikkurila Pensselipesu (Tool cleaner) is recommended for removing hardened paint.
Maintenance instructions Cleanse the surfaces with neutral (pH 6 - 8) detergent using soft brush, sponge or cloth at the earliest 1 month after painting. Very dirty surfaces can be cleansed with lightly alkaline (pH 8 -10) detergent using e.g. a cleaning cloth or sponge. Rinse the surfaces carefully after cleaning. Follow the dilution instructions of the detergent manufacturer.
The product achieves its final hardness and durability after one month under normal conditions, therefore the surfaces must be handled with care during this time. If the surfaces need to be cleaned soon after finishing, clean them lightly with a soft brush or damp cleaning cloth.
Maintenance treatment Surfaces painted with Feelings Extra Durable can be repainted with same kind of waterborne paint. See Preparation.
EU VOC 2004/42/EC-limit value (cat A/a)30g/l(2010).

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available on request. Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT VAK/ADR: not classified
sre040314 / pih140613 / niear020911 / 724-s