 |
PRODUCT DATA SHEET 01.04.2010 |
|
Supi Arctic - sauna finish |
|
|
| DESCRIPTION | Pearl shining, tintable acrylate finish for interior wooden surfaces in saunas. | |
| PRODUCT FEATURES | Forms a dirt- and water-repellent surface. Containts anti-mould agents, which protect the surface. Suitable for treatment of wood surfaces according to instructions. |
|
| RECOMMENDED USES | Walls and ceilings in steam, washing and dressing rooms.Interior surface treatment of humid rooms. Not suitable for treatment of benches. | |
| TECHNICAL DATA | ||
 8  12 |
||
| Base paints | EP | |
| Colour Range | Tikkurila's Valtti Arctic colour card. | |
| Gloss grade | Semi-matt | |
| Building material emission class | M1 | |
| Coverage | 8-12 m2/l depending on wood species. |
|
| Can sizes | 0,9 l | |
| Thinner | Water | |
| Application method | Brush |
|
| Drying time at 23°C and 50% relative air humidity | Dust dry after 30 min.Next coat can be applied after 2-3 hours. Dry to use after 2 days. | |
| Solids volume | Approx. 17 %. | |
| Density | 1.0 kg/l, ISO 2811. | |
| Storage | Protect from frost. | |
| Product code | 8606404 | |
| APPLICATION DETAILS | ||
| Application conditions | The surface to be painted must be dry, the temperature of the air at least +5 oC, and the relative humidity of the air below 80 %. | |
| Preparation | New clean wood surfaces:
Remove dirt and dust. Moisten lightly with water spray, let dry and sand loose wood fiber off. Remove sanding dust. Old dirty and previously with e.g. Supi Sauna Finish treated wood surfaces: Wash down with Supi Saunapesu Cleaning Agent according to instructions, rinse thoroughly and let dry. Sand and dust off. |
|
| Waxing | Stir Supi Arctic properly, from time to time also during usage.
Treat steam room walls once with tinted Supi Arctic. Thin with water if necessary. You can also treat the steam room walls twice, thinned with water up to 50 %. This way the brush marks will be less noticeable. Treat washing and dressing room surfaces first with Supi Arctic thinned with 20 % of water, then with unthinned product. Make a test application in a inconspicuous spot to ensure that the colour is correct. When the product is thinned the colour becomes a little lighter and more transparent than in the colour card. The properties of the wood and previous treatments incluence the final colour. Treat entire small surfaces without interruptions and large panel surfaces 1-2 panels at a time in order to achieve a uniform colour. You get a matching colour to benches - without the pearl effect - by tinting Supi Sauna wax according to the Valtti Arctic colour card. Pre-heat and ventilate the sauna thoroughly before use. |
|
| Cleaning of tools | Clean the tools with soap and water. Tikkurila Tool Cleaner is recommended for removal of hardened sauna finish. | |
| Maintenance instructions | Cleaning earliest about 1 month after applicaton, if necessary:
Clean the surface with Supi Saunapesu Cleaning Agent (1-2 dl of cleaning agent into 5 litres of water). |
|
| EU VOC 2004/42/EC-limit value | (cat A/f) 130g/l(2010) | |
| HEALTH AND SAFETY CLASSIFICATION | The product is not classified as dangerous. A Material Safety Data Sheet is available on request.Material Safety Data Sheet - Supi Arctic EP | |
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations. | |
| TRANSPORT | VAK/ADR - | |
| niear020810/sre280710/860 6404 | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
