Tikkurila uses cookies to ensure the best possible user experience. If you continue on our site, you will approve the use of cookies. Read more.
Tikkurila worldwide

Taika Stardust

Taika Stardust hopea 1L
DESCRIPTION Translucent, full-matt, acrylate based effect glaze.

To be used for patterning the walls painted with interior paints. As the glaze is translucent, the colour of the underlying coat strongly affects the end result. Good spotlights, sidelight or natural light emphasize the effect.

RECOMMENDED USES Interior walls and ceilings, to be used on painted surface.

  The paint is suitable for interior walls The paint is full-matt The paint is water-borne Tool: roller Tool: brush
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Colour Range Silver and Gold glaze
Gloss grade Full-matt
Building material emission class M1
Coverage 6-10 m2/l.
Can sizes 0,333; 1 and 3 liters
Thinner Water
Application method

Roller or brush

Drying time at 23°C and 50% relative air humidity Re-coatable after approx. 24 hours if needed. The surface is ready to use after approx. 2 days.
Wash resistance Withstands wiping with a damp cloth.
Heat resistance +85°C, ISO 4211-3.
Wet scrub resistance Class I, ISO 11998
Solids volume Approx. 12%
Density 1.0 kg/l ISO 2811
Storage Protect from frost.
Product code 0066108/9

Application conditions The surface to be painted must be dry, the temperature of the air at least
+10 oC, and the relative humidity of the air 30-70 %.
Preparation Unpainted surface:
Remove dirt and dust from new surfaces. Fill the surfaces with a suitable Presto or Prestonit filler, if needed, and sand the dried surface. Remove sanding dust. Prime e.g. with Feelings Universal Primer. Finish with interior paint, e.g. Harmony or Feelings Interior Paint 1-2 times.
Previously painted surface:
Wash down previously painted surfaces with Maalipesu cleaning detergent and rinse carefully with water. Sand hard and glossy surfaces matt. Remove sanding dust. Fill cracks and holes with a suitable Presto filler and sand the dried surface. Remove sanding dust. Finish with interior paint, e.g. Harmony or Feeling Interior Paint to the desired colour.
Finishing Mix Taika Stardust well before use. Apply the product with a roller or brush in criss-cross strokes. Make sure that the product is applied evenly on the whole area. Overlaps should be faded out as the work progresses. The milkiness will disappear as the surface dries out. A trial application on thick cardboard or another test surface is recommended. Taika Stardust can also be used with stencils applied with a normal small roller or brush. We do not recommend to use tools made of foam.
Cleaning of tools Remove excess glaze from the tools. Wash the tools with soap and water. For cleaning slightly hardened glaze, we recommend Tikkurila Pensselipesu (Tool Cleaner).
Maintenance instructions The product achieves its final hardness and durability after approx.
1 month under normal conditions, therefore the surfaces must be handled with care during this time. If the surfaces need to be cleaned soon after finishing, clean them lightly with a dry or damp cleaning cloth or mop.

At the earliest after approx. 1 month from finishing. The surfaces can be cleaned with dry brush, mop or dust towel. Dirty surfaces are cleaned with a damp cleaning cloth moistened with a neutral detergent (pH 6 - 8). The surface may not remain wet after cleaning. Follow the dilution instructions of the detergent manufacturer when preparing the detergent solution.

After painting the surfaces must be handled carefully for a few weeks time, because the paint will achieve its final hardness and durability in normal conditions after 1 month. If the surface must be cleaned soon after painting, clean the surface lightly with soft brush, cloth or mop.
Maintenance treatment Maintenance:
See instructions from "Previously painted surface". You can also cover the effect surface by painting it with a waterborne wall paint.
EU VOC 2004/42/EC-limit value (cat A/l) 200g/l(2010)
TAIKA Stardust contains VOC max. 200 g/l.

according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available at request.Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste.
TRANSPORT VAK / ADR: not classified
sre040912 / joa010912 / niear060912 / pih010912 / 0066108-9