PRODUCT DATA SHEET
(Previous date 30.04.2012)'
Tehopesu - Super Clean
|DESCRIPTION||Oxidizing cleaning agent. Patented product.|
|PRODUCT FEATURES||Ideal for washing and enhancing painted and unstained surfaces such as wooden patios, fences, walls, garden furniture and lattices and for cleaning plastic surfaces.|
|RECOMMENDED USES||To clean various indoor and outdoor surfaces: Tehopesu has a bleaching effect on darkened/weathered wood.|
|Features||pH-value of ready-to-use solution: approx. 10|
0.5 l Tehopesu powder (=5 litres of ready-made solution) is enough for approx. 15 square metres and 1 l Tehopesu powder (=10 litres of ready-made solution) is enough for approx. 30 square metres depending on the absorbency of the base and how dirty it is.
|Can sizes||0,5 l, 1 l.|
|Mixing ratio||Stir a can (0.5 l) of Tehopesu into 5 litres or 1 l into 10 litres of cool water in an open plastic container. Use at one time the whole contents of one can. Leave for about 15 minutes. Stir again before application. The solution should be used within 2-4 hours from when the last granule has dissolved. The solution is alkaline (pH >10).|
|Application method||Brush and roller
|Pot-life (+20°C)||The solution should be used within 2-4 hours from when the last granule has dissolved.|
|Density||1.0 kg/l ISO 2811|
|Storage||Note! The product is oxidizing, see warning text for further info. Keep the powder protected from the sun in a cool (under 30°C) and dry place and in the original packaging.|
|Treatment||Use a brush or roller to apply the solution generously to the surface you wish to clean and leave for 15-30 minutes to take effect. Leave for about 10 minutes with hardwood surfaces and furniture. For a consistent result, apply more of the Tehopesu solution as required to keep the surface being cleaned moist. In warm, sunny weather you can first moisten the surface with water to prevent the solution from drying too quickly. Apply several times if the surface is very dirty/darkened. Avoid splashing on clothes, face and plants.
Use a brush or pressure washer to wash the surface and rinse thoroughly with water. Do not use pressure washers at excessive pressure since this can easily cause splintering in old, discoloured wood. Use a washer that does not scratch (”e.g. scrubbing brush, coarse scouring pad, a fine stainless steel braiding or similar). Once the surface has dried, use the above tools to remove the wood fibre rising to the surface after treatment.
|Protection||Wear suitable protective clothing, protective gloves, safety goggles or a face mask. Protect plants against splashes. Avoid splashing clothes and, for example, unstained garden furniture and fittings. The product has a slight bleaching effect.|
|Post-treatment||We recommend painting painted surfaces after treatment with Tehopesu.|
|Mixing of components||Stir a can (0.5 l) of Tehopesu into 5 litres or 1 l into 10 litres of cool water in an open plastic container. Use at one time the whole contents of one can. Leave for about 15 minutes. Stir again before application. The solution should be used within 2-4 hours from when the last granule has dissolved. The solution is alkaline (pH >10).|
|Cleaning of tools||Wash in water|
HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
|Oxidizing, O Harmful, Xn Contains: Sodium carbonate peroxide hydrate CONTACT WITH COMBUSTIBLE MATERIAL MAY CAUSE FIRE. HARMFUL IF SWALLOWED. RISK OF SERIOUS DAMAGE TO EYES. Keep only in the original container in a cool, well-ventilated place away from combustible material. Keep container dry. Avoid contact with skin and eyes. Wear suitable protective clothing, gloves and eye/ face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show this container or label. Keep out of the reach of children. Contains < 5 % anionic surfactants and > 30 % oxygen-based bleaching agents. A Safety Data Sheet is available on request. Safety data sheet|
|ENVIRONMENTAL and WASTE DISPOSAL||Large amounts of undiluted product shall be delivered to hazardous waste collection point or to another waste management facility where it can be treated as hazardous waste. Small amounts can be destroyed by allowing the crystals dissolve completely in water; the weak solution can then be rinsed into drain.|
|TRANSPORT||Note! The product is oxidizing, see warning text for further info. Keep the powder protected from the sun. VAK/ADR 5.1 III|
|sre300816 / ssa290208 / akk020916 / 0061907|