 |
PRODUCT DATA SHEET 28.11.2006 |
|
Maalipesu (Cleaning Agent) |
|
|
| DESCRIPTION | Alkaline cleaning and pre-treating detergent for interior and exterior surfaces prior to painting. | |
| PRODUCT FEATURES | Cleans unpainted surfaces by removing dirt, grease, oil, wax etc. Pre-treatment ensures cleaning, smoothing and matting of previously painted surfaces. Undiluted Maalipesu is especially suitable for cleaning very dirty surfaces, where strong dissolving power is needed without the adverse effects of solvents. Not recommended for use with sheet metal roofs. Latex and other matt paint surfaces can be pre-treated with diluted Maalipesu (1 part Maalipesu , 10 parts water or 1 part Maalipesu, 5 parts water). | |
| RECOMMENDED USES | Walls, floors, furniture, doors, building boards, boats, etc. | |
| TECHNICAL DATA | ||
|
||
| Can sizes | 1 l, 3 l, 10 l. | |
| Thinner | Water | |
| Application method | Cleaning rag, mop or cleaning machine for floors. | |
| Density | 1.0 kg/l, ISO 2811 | |
| Storage | Protect from frost. | |
| Product code | 006_1901 | |
| APPLICATION DETAILS | ||
| Preparation | Protect glass and other surfaces which may be damaged by corrosion due to alkalinity. | |
| Treatment | Apply Maalipesu cleaning agent first on a small test area of the intended surface. Apply Maalipesu undiluted on hard and glossy surfaces by brush, sponge or cloth. Allow Maalipesu to take effect for a few minutes. Wash down the surface with a brush and rinse carefully with water. Undiluted Maalipesu cleans the surface and generates a matt finish that improves adhesion of the new paint coat. Latex paint surfaces and other matt surfaces can be pre-treated with Maalipesu diluted with water to the mixing ratio 1:10. Diluted Maalipesu (ratio 1:10) can also be used as a cleaning detergent. Very dirty surfaces can be treated with a stronger solution 1:5. When using the detergent, wear appropriate safety gloves and mask against splashes.
Some paint surfaces may be damaged when using a Maalipesu mixture that is too strong. |
|
| Cleaning of tools | Clean tools with water. | |
| HEALTH AND SAFETY CLASSIFICATION | Corrosive, C Contains: Potassium hydroxide and butyl diglycol CAUSES SEVERE BURNS. Keep locked up and out of the reach of children. Wear suitable protective clothing, gloves and eye/ face protection. Do not breathe vapour/ spray. Use only in well-ventilated areas. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Take off immediately all contaminated clothing. Contains < 5 % anionic surfactants and < 5 % phosphates. A Material Safety Data Sheet is available on request.Material Safety Data Sheet - Maalipesu | |
 Corrosive |
||
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations. | |
| TRANSPORT | VAK/ADR 8 III | |
| mli141106/lko141106//ktu281106/006 1901 | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
