Tikkurila worldwide
Tikkurila PRODUCT DATA SHEET
15.11.2006

Supi Saunapesu (Sauna Cleaner)

Supi Sauna Cleaner
DESCRIPTION SUPI Saunapesu is an acidic cleaning agent which disinfects, bleaches, and dissolves lime scale deposits in saunas and other humid rooms
PRODUCT FEATURES For sauna and other humid rooms. Gentle and thus non-corrosive. However, care should be taken when cleaning tile joints with concentrated or strong solutions. Do not use together with products containing chlorine.
RECOMMENDED USES For sauna and other humid rooms.

TECHNICAL DATA
  The paint is water-borne
Can sizes 1 l.
Thinner Water
Mixing ratio Depending on the degree of contamination, add 1 to 2 dl of Supi saunapesu to 5 litres of water.
Application method Brush or sponge.
Density 1.03 kg/l, ISO 2811
Storage Protect from frost.
Product code 001_7099

APPLICATION DETAILS
Application conditions The surface to be painted must be dry, the temperature of the air and the surface at least +5 ºC, and the relative humidity of the air below 80 %.
Cleaning Use a 10-15% solution. Supi Saunapesu can be used un-thinned on persistent lime scale deposits and rust.

Mix equal amounts of SUPI Saunapesu and water, and allow to act for approx. 15 minutes.

Note! Always rinse the surface with fresh water after treatment.
Cleaning of tools Clean with water.

HEALTH AND SAFETY CLASSIFICATION Corrosive, C Contains: Phosphoric acid < 5 % CAUSES SEVERE BURNS. Wear suitable protective clothing, gloves and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Take off immediately all contaminated clothing. Do not breathe vapour. Use only in well-ventilated areas. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). Keep locked up and out of the reach of children. Contains < 5 % non-ionic surfactants, < 5 % cationic surfactants and < 5 % perfumes. A Material Safety Data Sheet is available on request. Material Safety Data Sheet - Supi Sauna Cleaner
Corrosive
Corrosive
ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT VAK/ADR 8 III
mli011106/lko141106//tho031106/0017099

The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.

Back