 |
PRODUCT DATA SHEET 13.03.2008 |
|
Feelings Extra Durable Paint, semi-matt |
|
|
| DESCRIPTION | Waterborne acrylate latex finishing paint for use on interior walls and ceilings. | |
| PRODUCT FEATURES | Plaster, concrete, brick, building block and boards, MDF, etc. | |
| RECOMMENDED USES | Feelings Extra Durable can be used on primed wood, metal, and for repainting interior surfaces previously coated with waterborne, alkyd or acid catalysed paints. | |
| TECHNICAL DATA | ||
 5  8 |
||
| Base paints | A and C | |
| Colour Range | White and the complete Tikkurila Symphony Colour Collection | |
| Gloss grade | Semi-matt | |
| Coverage | 5-8 m2/l per coat. The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method. |
|
| Can sizes | Base paint A: 0,9 l, 2,7 l, 9 l, 18 l.
Base paint C: 0,9 l, 2,7 l, 9 l. |
|
| Thinner | Water | |
| Application method | Brush, roller or spray application. Thinning: if necessary thin by up to 5% with
water. |
|
| Drying time at 23°C and 50% relative air humidity | Normally touch-dry in two hours and recoatable after four hours. Final hardness will be achieved after 2-3 days. | |
| Wash resistance | >10 000 cycles (SFS 3755)
|
|
| Chemical resistance | Good (ISO 2812-1) | |
| Heat resistance | 85 °C (ISO 4211-2 and ISO 4211-3) | |
| Solids volume | Approx. 40 % | |
| Density | 1.2 kg/l, ISO 2811 | |
| Storage | Protect from frost. | |
| Product code | 724/5_6001/3 | |
| MED Certificate | VTT-C-3632-15-09 Harmony | |
| APPLICATION DETAILS | ||
| Application conditions | The surface to be painted must be dry, the temperature of the air at least +5 ºC, and the relative humidity of the air below 80 %. | |
| Preparation | Surfaces must be clean, dry, and free from grease, dirt, oil, wax, rust, all loose material and surface contamination. Use recommended Tikkurila products as cleaning agents and for mould removal. Use recommended Tikkurila fillers for filling cracks, nail holes, blemishes etc., and leveling of uneven surfaces. Ensure that existing glossy, gloss painted and filled surfaces are thoroughly flatted down. Ensure that all surfaces are thoroughly prepared. | |
| Priming | Prime unpainted wall and ceiling surfaces overall and spot prime all bare areas on previously painted walls and ceilings with Feelings Universal Primer.
Prime all bare wood with Unica Adhesion Primer and bare metal surfaces with Unica Metal Primer. In areas of high humidity walls and ceilings should be primed with Feelings Moisture Stop prior to the application of Feelings Universal Primer and/or Feelings Extra Durable. |
|
| Painting | Stir the paint thoroughly and apply two coats of Feelings Extra Durable overall. | |
| Cleaning of tools | Clean with water immediately after use. Tikkurila Pensselipesu (Tool cleaner) is recommended for removing hardened paint. | |
| EU VOC 2004/42/EC-limit value | (cat A/a) 75g/l (2007)/ 30g/l(2010). Feelings Extra Durable Semi-matt contains VOC max. 75g/l. | |
| HEALTH AND SAFETY CLASSIFICATION | The product is not classified as dangerous. A Material Safety Data Sheet is available on request. Material Safety Data Sheet - Feelings Extra Durable | |
| ENVIRONMENTAL PROTECTION AND WASTE DISPOSAL | Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations. | |
| TRANSPORT | VAK/ADR - | |
| ssa130308/ars200308/mpy251005/724- | ||
The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages caused by using the product against our instructions or for inappropriate purposes.
